View Single Post
  #13   Report Post  
Old October 13th 13, 08:02 AM posted to rec.radio.amateur.boatanchors,uk.radio.amateur
gareth gareth is offline
external usenet poster
 
First recorded activity by RadioBanter: Sep 2012
Posts: 1,382
Default Variable selectivity?

WOW!

A very full response, thank-you.


"Richard Knoppow" wrote in message
...

"gareth" wrote in message
...
I wonder if anyone can offer a picture of the variable selectivity
arrangement of
the Eddystone EA12, which I believe was also used by some other
manufacturers?

This was the scheme whereby coupling between the primary and secondary
of IF
transformers was varied nechanically by distancing the two halves of the
transformer
from each other.

I have access to photos showing the operating levers, but what interests
me for
the moment is to have a peek, or peeks, inside the IF cans themselves.


This is the same arrangement used by Hammarlund in the Super-Pro
series. Its been too long since I had a Super-Pro IF can open to remember
exactly how the movable coils were fastened and guided but the variation
was done by a post coming out the bottom of the can and operated by a cam
on a shaft turned by the front panel "selectivity" knob. Very simple
mechanism. This type of variable selectivity is the only one with
completely symmetrical expansion of the passband. Those using tapped
inductances coupled to the IF coils, such as used in the SP-600-JX and RCA
AR-88, are nearly as good. Capacitance coupling usually results in some
asymmetry as seen in some Hallicrafters receivers although the variable
pass band in the SX-28 works quite well.
Later in this thread someone asks about variable crystal filters.
There are essentially two forms: the original Lamb filter and the later
one patented by Hammarlund in 1938 and first used in the HQ-120-X. The
Hammarlund filter has the advantage that the center frequency does not
vary with the bandwidth adjustment or when the phasing null is moved
around. The Hammarlund circuit was used in the SP-200, 400 and 600 Super
Pro receivers as well as the HQ series and, in slightly modified form, by
TMC in the GPR-90 and by Collins in the 75A-1,2,3 and 51J series.
National and Hallicrafters mostly used the earlier Lamb circuit. as did
Hammarlund in the SP-100 Super-Pro.


--

--
Richard Knoppow
Los Angeles
WB6KBL