Hello Group:

I have a Uniden BC 760 XLT that seems work well except that it is totally deaf.
The CPU & Memory seem good, the squelch works but otherwise, it is totally deaf.
The unit is equipped with the RF amplifier (have tried turning it on and off).
The unit also has the CTCSS and also have tried turning it on and off with no
effect.

I did open the unit and checked for bad solder joints, a bad antenna connector,
etc. but did not see any mechanical issues.
I am guessing the first mixer or second mixer has died.
Could not find a service manual or schematic to further understand the radio (I
do have an owner's manual but that is worthless to service the radio with).

When it used to work, it was not a bad scanner for its day.
While the image frequencies could be an issue, you just worked around them.
The reason I want to get it working again is that it is a small scanner in size,
has a metal case, and was meeting my requirements.

I am not sure that Uniden will repair something this old (must be at least 20
years old now).

Any advice would be useful.

Thanks.