I am a boater who uses deep discharge marine batteries. I purchased
from West Marine a gauge that measurea percent discharged, based on a
narrow voltage band. Voltage itself is not a good indicator. A battery
can show 12V and be almost dead.

Check out West Marine or Defender Industries.

kip


On Sun, 27 Jun 2004 14:56:07 -0700, Jack Twilley
wrote:

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I like the idea of the Whatt Meter, and I've seen them for sale at
hamfests and they look great. I started looking at the specifications
and I discovered some limitations which make it much less useful for
my needs.

The deep-cycle batteries I use have much more capacity than the ones
they use for electric flight (that's the original target audience for
Astro Flight's products), so that's a minus. Also, the battery
system I have currently installed will charge when it's not
discharging, which doesn't fit the NiCad model very well.

Ideally, the meter I want to use would resemble an automobile fuel
gauge in that it would have some idea of what "full" was (whether by
testing via full discharge or by entering in data somehow) and it
would be able to handle charging and discharging without being
rewired. The latter is the truly crucial bit, as the former can be
implemented with a PIC. The PIC could do much more, of course, but as
a bare minimum, I'd like to know how much capacity remains and how
quickly I'm using it.

Is there anything out there like this? Is there a schematic for the
charge/discharge data collection which would be suitable for my needs?
I appreciate any help with this idea, as it might turn out to be
useful for more than just me.

Jack.