RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Antenna (https://www.radiobanter.com/antenna/)
-   -   Female PL259? (https://www.radiobanter.com/antenna/103074-female-pl259.html)

Dave Platt September 1st 06 05:53 AM

Female PL259?
 
In article , Curious nonegiven@anon wrote:

I am looking for a female version of the standard PL-259 connector. It
connects the same way a 259 does, but is simply a female version.
I called The Wireman and was told they no longer handle these connectors
due to no interest.
My goal is to make a jumper cable (I've seen these connectors at Rad
Shack on pre-made cables) with a male on one end, a female on the other
so as to add a 25 ft. length of cable without having to mess with a
barrel connector.
Anybody know where this can be found? And, NO, I am not in the market
for an SO-239.


http://www.antenex.com has them - part number CPL9CF is a crimp-on
female PL-259 for RG-58 cable. Antenex dealers such as Falcon Direct
carry the same part, same number.

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

Curious September 1st 06 06:16 AM

Female PL259?
 
I am looking for a female version of the standard PL-259 connector. It
connects the same way a 259 does, but is simply a female version.
I called The Wireman and was told they no longer handle these connectors
due to no interest.
My goal is to make a jumper cable (I've seen these connectors at Rad
Shack on pre-made cables) with a male on one end, a female on the other
so as to add a 25 ft. length of cable without having to mess with a
barrel connector.
Anybody know where this can be found? And, NO, I am not in the market
for an SO-239.

Dale Parfitt September 1st 06 02:02 PM

Female PL259?
 

"Curious" nonegiven@anon wrote in message
...
I am looking for a female version of the standard PL-259 connector. It
connects the same way a 259 does, but is simply a female version.
I called The Wireman and was told they no longer handle these connectors
due to no interest.
My goal is to make a jumper cable (I've seen these connectors at Rad Shack
on pre-made cables) with a male on one end, a female on the other so as to
add a 25 ft. length of cable without having to mess with a barrel
connector.
Anybody know where this can be found? And, NO, I am not in the market for
an SO-239.


A female PL-259 will have the threaded ring on it- how will you deal with 2
threaded rings being mated together? What you ARE looking for is an in-line
SO-239. Pasternack and The RF Connection both carry them for cables from
RG-58 to RG-213 sized cables.

Dale W4OP



Ed September 1st 06 06:41 PM

Female PL259?
 


A female PL-259 will have the threaded ring on it- how will you deal
with 2 threaded rings being mated together? What you ARE looking for
is an in-line SO-239. Pasternack and The RF Connection both carry them
for cables from RG-58 to RG-213 sized cables.



Further Info: Pasternak's Catalog #2006C page 134 shows what you want.
Depending on whether you are using RG58 or RG8, and depending on whether
you want crimp connector ( requires special crimp tool) or clamp type, they
have it all.

www.Pasternack.com or 866-727-8376


Ed K7AAT

Dave September 1st 06 07:48 PM

Female PL259?
 
But, the SO-239 is the natural 'mate' for the PL-259 :-)

Build your cable with PL-259s on both ends. Then buy a UHF Adapter Jack-Jack,
Amphenol P/N 83-1J.

http://www.amphenolrf.com/products/CatalogPages/unf_catalog.pdf

This is the easiest way to achieve what you want to do. The 83-1J is available
at HRO et al distributors.

/s/ DD, W1MCE


Curious wrote:

I am looking for a female version of the standard PL-259 connector. It
connects the same way a 259 does, but is simply a female version.
I called The Wireman and was told they no longer handle these connectors
due to no interest.
My goal is to make a jumper cable (I've seen these connectors at Rad
Shack on pre-made cables) with a male on one end, a female on the other
so as to add a 25 ft. length of cable without having to mess with a
barrel connector.
Anybody know where this can be found? And, NO, I am not in the market
for an SO-239.



Curious September 2nd 06 08:45 AM

Female PL259?
 

"Ed" wrote in message
. 192.196...


A female PL-259 will have the threaded ring on it- how will you deal
with 2 threaded rings being mated together? What you ARE looking for
is an in-line SO-239. Pasternack and The RF Connection both carry them
for cables from RG-58 to RG-213 sized cables.



Further Info: Pasternak's Catalog #2006C page 134 shows what you want.
Depending on whether you are using RG58 or RG8, and depending on whether
you want crimp connector ( requires special crimp tool) or clamp type, they
have it all.

www.Pasternack.com or 866-727-8376


Ed K7AAT

Thank you Dave, Dale, and Ed for taking the time to not only respond, but to
show me where to find this connector. May you make many DX contacts in the
coming months.




J. B. Wood September 5th 06 12:28 PM

Female PL259?
 
In article , "Curious" nonegiven@anon wrote:

Further Info: Pasternak's Catalog #2006C page 134 shows what you want.
Depending on whether you are using RG58 or RG8, and depending on whether
you want crimp connector ( requires special crimp tool) or clamp type, they
have it all.

www.Pasternack.com or 866-727-8376


Ed K7AAT


Hello, and I would like to point out (from experience at work) that
Pasternack is a convenience store for bulk RF connectors and pre-made,
connectorized RF cables - You will save time but you will pay big $$ (e.g.
compared to Rat Shack or a Ham fest for a similar item) for it. They are
prompt, however. Sincerely, and 73s from N4GGO,

John Wood (Code 5550) e-mail:
Naval Research Laboratory
4555 Overlook Avenue, SW
Washington, DC 20375-5337


All times are GMT +1. The time now is 03:49 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com