Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hello:
I have been trying to find the answer to my question on the front-to- back ratio on UHF antennas, and so far have been unsuccessful. I think I understand what the front-to-back ratio is, but the specs on my Winegard PR-8800 (8 bay bowtie) show negative front-to-back ratios (-9 dB @ ch 14; -17 dB @ ch 32; -11 dB @ ch 50; -9 dB @ ch 69). The "dB over reference dipole" is: 10.7 dB @ ch 14; 12 dB @ ch 32; 11 dB @ ch 50; 12.5 dB @ ch 69. How can the front-to-back ratio be negative, and is this good or bad? I am assuming this could be bad in my case as I would like the signal at the back of the antenna to be minimal. I am currently trying to improve our HDTV reception. I currently have the PR-8800 antenna in our attic hooked to a Radio Shack 30 dB mast amp. This antenna works very well overall. But from time to time, on a couple channels the HD signal strength will drop all the way down, enough to drop the signal or cause break-up. I've been considering a Winegard HD9095P or PR9032 to use in conjunction with the PR-8800 since they have a higher gain than the PR-8800, then rotate the PR-8800 the other way to receive some different stations. I really appreciate the help and feedback on this!! Thanks, -- Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Antenna Axial Ratio RHCP LHCP | Antenna | |||
Flipping the Inverted "L" Antenna 'Back-to-Front' = Better Performance | Shortwave | |||
calculate front/back ratio of Yagi antenna? | Antenna | |||
signal to noise ratio drops on connecting the antenna | Homebrew | |||
signal to noise ratio drops on connecting the antenna | Homebrew |