Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I am wondering if this will work…
This is for receive only…. I have a mag mount antenna that I have trimmed to around 19" for around 155 MHz (1/4 wave), I was wondering about adding a 6.5" antenna next to it for UHF. The antenna is screwed to the mag base on a 1/4 20 stud. My idea is to take a 2 inch piece of flat steel and drill a 1/4 inch hole to mount under the antenna. Then I will attach my 6.5" antenna.. | | -- 19" | | | | | -- 6.5" |_| | | | | -- Coax | | My other question has to do with grounding. I used my VOM to check and see it the outer braid of the coax goes anywhere. I thought it might ground to the magnet but this is not the case. The center of the coax goes to the 1/4" stud on the mag mount but the outer braid seems to not go anywhere.. is this right? Thanks! Fred |
#2
![]() |
|||
|
|||
![]() |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Mobile Ant L match ? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |