Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
One more thing on this. In looking at microwave xformers, I only see
power specified and not a word about voltage. Are they all the same and what voltage are they? js -- PHOTO OF THE WEEK: http://schmidling.com/pow.htm Astronomy, Beer, Cheese, Fiber,Gems, Sausage,Silver http://schmidling.com |
#12
![]() |
|||
|
|||
![]()
Jack Schmidling wrote:
Scott Dorsey wrote: It is not, no. You can use two out of phase, but that kills your volume requirements. Roger but how does one "out of phase" two transformers? Okay, each transformer has the righthand side of the secondary tied to ground. So, you apply AC to the primary, with the hot on the left and the neutral on the right to one transformer, but the hot on the right and the neutral on the left to the other transformer. So the polarity is reversed between the two. Now you have two outputs, each very high voltage with respect to ground, but out of phase. This is just like having a center-tapped transformer of twice the output voltage, but with the center tap grounded. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
need help with xmission line xformer | Homebrew | |||
FA linear power supply with toroid power xformer | Equipment | |||
HRO power xformer | Boatanchors | |||
Power Xformer heat query | Boatanchors | |||
FS: NIB Collins Xformer | Swap |