RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Boatanchors (https://www.radiobanter.com/boatanchors/)
-   -   How do you move boatanchors around? (https://www.radiobanter.com/boatanchors/73973-how-do-you-move-boatanchors-around.html)

Uncle Peter July 5th 05 02:40 AM


"Bob Rinaldi" wrote in message
...
I sold them all....



Boxing and packing had to be even worse!

Pete



Michael A. Terrell July 5th 05 06:28 AM

K3HVG wrote:

Ed, Although I can still move many of my vintage BA's via "personal
mobility", I have a flat-top work cart that's a bit more than desk
height. I transfer to the cart, then to the bench. Beats the heck out
of trying to horse an R-390A around. Similar carts are available from
Harbor Freight. Look for one without the raised sides, though.. that's
the key.



Just turn the top tray upside down, or make a plywood cap that drops
over the tray.
That way you can use the same cart for different jobs. I cut 1/2"
plywood and drop it into the bottom of the tray and add a thin piece of
industrial carpet to protect the finish on things that spend a lot of
time on the bottom tray.

--
http://home.earthlink.net/~computersforvets/

Michael A. Terrell
Central Florida

Michael A. Terrell July 5th 05 06:31 AM

Randy or Sherry Guttery wrote:

Ed wrote:
I have just realized that I am as old as my radios. I can't pick up 100
pound transmitters any more.


Even in my younger days, since most of my radios weigh as much as I do -
(since I'm around 100 pounds myself) this has always been an issue.
While he's often a PITA; that's one of the main reasons I keep Randy
around: he's still useful as "gorilla" - ah - er "crane"! ;).

Seriously - a sturdy cart about the right height to "slide" 390s, AR88s,
RAO-6's, ART13s and such to and from tables, the work bench, etc. is a
must. Equally seriously - recruiting help when moving the big ones goes
from being a convenience - to a necessity.
--
Sherry



Be careful Sherry, you know he reads this newsgroup, too. ;-)

--
http://home.earthlink.net/~computersforvets/

Michael A. Terrell
Central Florida

tchrme July 6th 05 03:07 AM

Isn't that why we have kids? My son is 6'4" 200lbs and an electronic
engineering major so he knows about delicate equipement. 73 Mike KF6KXG


[email protected] July 6th 05 06:03 PM

Easy: have a buyer show up & help you lug it to his truck. :-)


Michael A. Terrell July 7th 05 04:28 AM

tchrme wrote:

Isn't that why we have kids? My son is 6'4" 200lbs and an electronic
engineering major so he knows about delicate equipement. 73 Mike KF6KXG



No kids, I walk with a cane and I like to work on heavy old receivers
and test equipment so I had to find something that works for me.

--
http://home.earthlink.net/~computersforvets/

Michael A. Terrell
Central Florida

Jerry McCarty July 19th 05 03:24 PM


On 4-Jul-2005, " Uncle Peter" wrote:

I have the same problems with 100 lbs. receivers, going in and out
of a six foot rack!! The AR-88D is a 98 lb. beast!


Here's what I do. Good engineering practice calls for a minimum of 1 RU
between rack mounted items. I have two 1 RU panels with fairly beefy angle
stock mounted on them. Put one on the front of the rack, under the radio and
attach the other to the rear rack rails. Cut some pieces wood long enough to
firmly rest on the angles and thick enough to fit snugly against the bottom
of the unit. Note- it has to fit against the bottom of the unit, not the
bottom of the front panel. Pop the rack screws out of the unit and your unit
should rest comfortably on the temporary shelf making it much easier to
slide out. Makes it even easier to slide in since you aren't trying to hold
the dumb thing in place while inserting the screws.

This may be easier to visualize than describe. If there is any interest, I
can do a quick PDF.

And some day I'll tell you how I get my 250 lb. FRR-59 into a rack by
myself.

Uncle Peter July 20th 05 02:28 AM


"Jerry McCarty" wrote in message
...

On 4-Jul-2005, " Uncle Peter" wrote:

I have the same problems with 100 lbs. receivers, going in and out
of a six foot rack!! The AR-88D is a 98 lb. beast!


Here's what I do. Good engineering practice calls for a minimum of 1 RU
between rack mounted items. I have two 1 RU panels with fairly beefy angle
stock mounted on them. Put one on the front of the rack, under the radio

and
attach the other to the rear rack rails. Cut some pieces wood long enough

to
firmly rest on the angles and thick enough to fit snugly against the

bottom
of the unit. Note- it has to fit against the bottom of the unit, not the
bottom of the front panel. Pop the rack screws out of the unit and your

unit
should rest comfortably on the temporary shelf making it much easier to
slide out. Makes it even easier to slide in since you aren't trying to

hold
the dumb thing in place while inserting the screws.

This may be easier to visualize than describe. If there is any interest, I
can do a quick PDF.

And some day I'll tell you how I get my 250 lb. FRR-59 into a rack by
myself.


Ended up with a large 4 rail rack, which will lend itself to installing
paralled
runners along the sides for the receiver chassis's to rest and slide on.

Still leaves the problem of carry the AR-88 around the room, though...

Pete




All times are GMT +1. The time now is 04:55 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com