I just know that Santa will bring me my Knight Star Roamer this year. Been
waiting since 1967.

I can just smell the aroma of burning solder flux. I hope that Allied
prestripped and tinned all the wires to their exact length. I can hardly
wait to mount last component on the chassis and listen to stations through
the thick 120 cycle hum of the half-wave power supply. I just know that if
I do a real good alignment on the radio, the set will be sensitive up to
30MHz even though it has no RF amplifier. My code key is ready so I can
practice Morse when I crank up the Sensitivity control so the IF starts
oscillating.

If not a Star Roamer....maybe a Span Master will do.

Thanks Santa! I'll leave a couple of 807's for you on the table.

On Fri, 24 Dec 2004 21:09:04 GMT, "patgkz" wrote:

I just know that Santa will bring me my Knight Star Roamer this year. Been
waiting since 1967.

I can just smell the aroma of burning solder flux. I hope that Allied
prestripped and tinned all the wires to their exact length. I can hardly
wait to mount last component on the chassis and listen to stations through
the thick 120 cycle hum of the half-wave power supply. I just know that if
I do a real good alignment on the radio, the set will be sensitive up to
30MHz even though it has no RF amplifier. My code key is ready so I can
practice Morse when I crank up the Sensitivity control so the IF starts
oscillating.

If not a Star Roamer....maybe a Span Master will do.

Thanks Santa! I'll leave a couple of 807's for you on the table.



I hope you get it. Shouldn't half wave ripple be 60 cycle?

On Fri, 24 Dec 2004 21:09:04 GMT, "patgkz" wrote:

I just know that Santa will bring me my Knight Star Roamer this year. Been
waiting since 1967.

I can just smell the aroma of burning solder flux. I hope that Allied
prestripped and tinned all the wires to their exact length. I can hardly
wait to mount last component on the chassis and listen to stations through
the thick 120 cycle hum of the half-wave power supply. I just know that if
I do a real good alignment on the radio, the set will be sensitive up to
30MHz even though it has no RF amplifier. My code key is ready so I can
practice Morse when I crank up the Sensitivity control so the IF starts
oscillating.

If not a Star Roamer....maybe a Span Master will do.

Thanks Santa! I'll leave a couple of 807's for you on the table.



I hope you get it. Shouldn't half wave ripple be 60 cycle?

Geez.. How 'bout a Space Spanner!! Now there's a real performer. That,
an an AT-1 and it'll be DX galore!! Hope all get the radio they're
looking for. But, no BB guns... You'll put your eye out, sure enough!!!
K3HVG (Heath AR-2/QF-1 and Johnson Adventurer on 7175Kcs, 1959)

Geez.. How 'bout a Space Spanner!! Now there's a real performer. That,
an an AT-1 and it'll be DX galore!! Hope all get the radio they're
looking for. But, no BB guns... You'll put your eye out, sure enough!!!
K3HVG (Heath AR-2/QF-1 and Johnson Adventurer on 7175Kcs, 1959)

Sorry, you're right....60Hz half-wave hum, not 120. I hope my Roamer has
the newer silicon diode instead of the selenium rectifier. My Dad says that
the selenium will emit harmful gas when it burns and shorts. He says that's
why some people turn out to be Politicians.

Merry Christmas and don't forget to keep the leads as short as possible to
the bandswitch!


"patgkz" wrote in message
...
I just know that Santa will bring me my Knight Star Roamer this year. Been
waiting since 1967.

I can just smell the aroma of burning solder flux. I hope that Allied
prestripped and tinned all the wires to their exact length. I can hardly
wait to mount last component on the chassis and listen to stations through
the thick 120 cycle hum of the half-wave power supply. I just know that
if
I do a real good alignment on the radio, the set will be sensitive up to
30MHz even though it has no RF amplifier. My code key is ready so I can
practice Morse when I crank up the Sensitivity control so the IF starts
oscillating.

If not a Star Roamer....maybe a Span Master will do.

Thanks Santa! I'll leave a couple of 807's for you on the table.

Sorry, you're right....60Hz half-wave hum, not 120. I hope my Roamer has
the newer silicon diode instead of the selenium rectifier. My Dad says that
the selenium will emit harmful gas when it burns and shorts. He says that's
why some people turn out to be Politicians.

Merry Christmas and don't forget to keep the leads as short as possible to
the bandswitch!


"patgkz" wrote in message
...
I just know that Santa will bring me my Knight Star Roamer this year. Been
waiting since 1967.

I can just smell the aroma of burning solder flux. I hope that Allied
prestripped and tinned all the wires to their exact length. I can hardly
wait to mount last component on the chassis and listen to stations through
the thick 120 cycle hum of the half-wave power supply. I just know that
if
I do a real good alignment on the radio, the set will be sensitive up to
30MHz even though it has no RF amplifier. My code key is ready so I can
practice Morse when I crank up the Sensitivity control so the IF starts
oscillating.

If not a Star Roamer....maybe a Span Master will do.

Thanks Santa! I'll leave a couple of 807's for you on the table.

"patgkz" wrote in message
...
Sorry, you're right....60Hz half-wave hum, not 120. I hope my Roamer has
the newer silicon diode instead of the selenium rectifier. My Dad says
that
the selenium will emit harmful gas when it burns and shorts. He says
that's
why some people turn out to be Politicians.

Just democrats

JOE

"patgkz" wrote in message
...
Sorry, you're right....60Hz half-wave hum, not 120. I hope my Roamer has
the newer silicon diode instead of the selenium rectifier. My Dad says
that
the selenium will emit harmful gas when it burns and shorts. He says
that's
why some people turn out to be Politicians.

Just democrats

JOE

de-bone and cube; continue to reduce the broth.
Brown the onions, peppers and celery.
Add the meat then season, continue browning.
De-glaze with sherry, add the reduced broth.
Finally, put in the root vegetables and simmer for 15 minutes.
Allow to cool slightly.
Place the pie pan in 375 degree oven for a few minutes so bottom crust is not soggy,
reduce oven to 325.
Fill the pie with stew, place top crust and with a fork, seal the crusts together
then poke holes in top.
Return to oven and bake for 30 minutes, or until pie crust is golden brown.



Sudden Infant Death Soup

SIDS: delicious in winter, comparable to old fashioned Beef and Vegetable Soup.
Its free, you can sell the crib, baby clothes, toys, stroller... and so easy to
procure if such a lucky find is at hand (just pick him up from the crib and
he?s good to go)!

SIDS victim, cleaned
½ cup cooking oil
Carrots
onions
broccoli
whole cabbage
fresh green beans
potato
turnip
celery
tomato
½ stick butter
1 cup cooked pasta (macaroni, shells, etc.)

Remove as much meat as possible, cube, and brown in hot oil.
Add a little water, season, then add the carcass.
Simmer for half an hour keeping the stock thick.
Remove the carcass and add the vegetables slowly to the stock,
so that it remains boiling the whole time.
Cover the pot and simmer till vegetables are tender
(2 hours approximately).
Continue seasoning to taste.
Before serving, add butter and pasta,
serve piping with hot bread and butter.



Offspring Rolls

Similar to Vietnamese style fried rolls, they have lots of meat
(of course this can consist of chicken, beef, pork, or shrimp).
Who can resist this classic appetizer; or light lunch served with
a fresh salad? Versatility is probably this recipe?