Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
On Sat, 7 Jul 2007 15:50:08 -0400, "David" wrote:
Does anyone run legal power anymore? I can sit in my jeep and work the United States and many times the world on any band from 10 to 40 meters running 40 watts. But I can't seem to make a damn CB contact. I modified my Yaesu FT840 for open TX when the 60 meter band became available to hams and I can TX on the CB channels now. Even running 20 W AM no one seems to hear me on any CB channel though I can tune up to 10 Meters and get a 59+20 signal report from Arizona an the same radio and antenna. I'm starting to think that every CBer runs 600 Watts with a bad receiver. I used to have a lot of fun with a little 4 watt CB when I was a kid and before I got my ham ticket. David KG2LI The CB band has gone to hell this summer. I cannot engage in local rag chew because I have DX coming in like they are next door. I love DX, but sometime I want to just BS with my friends. Vinnie S. |
#12
![]() |
|||
|
|||
![]()
The CB band has gone to hell this summer. I cannot engage in local rag chew
because I have DX coming in like they are next door. I love DX, but sometime I want to just BS with my friends. And now you know why I earned privileges on lots of other frequencies. 11 meters is now just one band of many. I find folks that stay on one band only. If you want to meet new people, you've just got to poke around... |
#13
![]() |
|||
|
|||
![]()
"Frank Gilliland" wrote...
CFR95.425(a): You must not make or have any one else make any internal modification to your CB transmitter. CFR95.425(c): You must not operate a CB transmitter which has been modified by anyone in any way,.... You radios are illegal and operating them is illegal. You manufacture and sell a product which has the sole purpose of illegal modification and operation. Out of interest, would it be legal if he put it in a box as a plug in unit? Regards, Peter. http://www.citizensband.radiouk.com/ |
#14
![]() |
|||
|
|||
![]()
On Sun, 15 Jul 2007 20:23:10 +0100, " Peter"
wrote in : "Frank Gilliland" wrote... CFR95.425(a): You must not make or have any one else make any internal modification to your CB transmitter. CFR95.425(c): You must not operate a CB transmitter which has been modified by anyone in any way,.... You radios are illegal and operating them is illegal. You manufacture and sell a product which has the sole purpose of illegal modification and operation. Out of interest, would it be legal if he put it in a box as a plug in unit? Yep, as long as the radio is not modified. The only external device that is prohibited by Part 95 is an RF power amp. That's U.S. rules, BTW. |
#15
![]() |
|||
|
|||
![]()
"Frank Gilliland" wrote...
" Peter" wrote: Out of interest, would it be legal if he put it in a box as a plug in unit? Yep, as long as the radio is not modified. The only external device that is prohibited by Part 95 is an RF power amp. That's U.S. rules, BTW. As I expected :~) Here in the UK, the use of power amps and pre-amps are both illegal. However, as possession is not illegal, they have to prove use. The use of a SWR meter is only allowed while testing the antenna. External microphones could be a grey (or gray) area. The radio is tested for approval, with the microphone that will be supplied. I believe that, if the manufacturer changes the microphone supplied they must submit the radio for retesting - at a very high cost. But I see nothing in the rules about users plugging in any replacement microphone they can get their hands on. However, back to my original point... His present method: 1. Is illegal. 2. Is only a board - putting off general CBers. 3. Is not as impressive to a CBer as a finished product. 4. Allows "screwdriver experts" to fekk up the fitting and blame his product. 5. Has no way of proving "tampering", as the customer is supposed to "tamper". 6. Allows less profit, with the extra going to people, who may be wrecking the equipment. 7. Encourages "DIY" bodging inside radio. What the potential customer is asking for: 1. Is legal. 2. Is "plug & play - CBer friendly. 3. Is a finished product and can look that way. 4. Ensures that only the manufacturer does the wiring. 5. Can be warranty sealed. 6. Allows the manufacturer to make extra money on the complete product. 7. Ensures the radio remains working as designed. Yep, I can see why he decided to keep it as an add-on board... You tell a CBer that the product is legal, there's no way they are going to buy it. :~) Regards, Peter. http://www.citizensband.radiouk.com/ |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
New forum and site for legal, unlicensed low power radio hobbyists. | Shortwave | |||
What's the max legal power in Japan? | Dx | |||
What's the max legal power in Japan? | Dx |