Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I've got a Mazda Tribute (near replica of the Ford Escape) and have the
dreaded RFI from the electric fuel pump. I've done a ton of research on the Internet and determined that the most popular option for resolving the issue is to install a RFI filter on the pump. This involves dropping the tank, which is beyond my capability. So, to do the install will involve a trip to the dealership, costing around $200 for parts/installation. I've also seen a homebrew ferrite filter that can be installed at the power lead for the fuel pump, which is an option. But, I did see one posting where a guy resolved the problem by upgrading to a K40 antenna, which he said filtered the RFI. So, I'm wondering if anyone has had success eliminating fuel pump RFI with a good antenna? I'm willing to give that a try, but it will probably involve ordering one, so if there's only a small chance it will work I'll probably skip this option and go straight for the filter. Thoughts? |
#2
![]() |
|||
|
|||
![]() |
#4
![]() |
|||
|
|||
![]()
1. It's mounted using a standard RS bracket within a plastic
compartment on the console. 2. No, powered from the fusebox. 3. Grounded to a bolt on the door hinge. |
#6
![]() |
|||
|
|||
![]() |
#7
![]() |
|||
|
|||
![]() |
#8
![]() |
|||
|
|||
![]()
This is good advice... really all you would need is one 0.1UF from the
positive to ground. Like he said... close to the pump. Professor www.telstar-electronics.com I have yet to see any Ford's resolved in this manor, the fix is adding a couple .1 disc caps at the fuel pump 12v leads, bare the wire close to the pump as possible, solder the caps across the + and - wire, and from + to chassis ground and ground wire to chassis ground. 2 on each should do the trick. You dont have to drop the tank to do this just get wires as close to pump as possible. |
#9
![]() |
|||
|
|||
![]()
I heard on my scanner on a 2 meter repeater some guy was fighting with
Ford for the same problem. Not sure what Ford they were talking about. Ford did the fix, unfortunately I don't remember what that was. Sorry about that. I heard it a few months ago. The owner of the car is still fighting with Ford on who will pay for it. Good Luck!! 73 ================ wrote: I've got a Mazda Tribute (near replica of the Ford Escape) and have the dreaded RFI from the electric fuel pump. I've done a ton of research on the Internet and determined that the most popular option for resolving the issue is to install a RFI filter on the pump. This involves dropping the tank, which is beyond my capability. So, to do the install will involve a trip to the dealership, costing around $200 for parts/installation. I've also seen a homebrew ferrite filter that can be installed at the power lead for the fuel pump, which is an option. But, I did see one posting where a guy resolved the problem by upgrading to a K40 antenna, which he said filtered the RFI. So, I'm wondering if anyone has had success eliminating fuel pump RFI with a good antenna? I'm willing to give that a try, but it will probably involve ordering one, so if there's only a small chance it will work I'll probably skip this option and go straight for the filter. Thoughts? |
#10
![]() |
|||
|
|||
![]()
I heard on my scanner on a 2 meter repeater some guy was fighting with
Ford for the same problem. Not sure what Ford they were talking about. Ford did the fix, unfortunately I don't remember what that was. Sorry about that. I heard it a few months ago. The owner of the car is still fighting with Ford on who will pay for it. Good Luck!! 73 ================ wrote: I've got a Mazda Tribute (near replica of the Ford Escape) and have the dreaded RFI from the electric fuel pump. I've done a ton of research on the Internet and determined that the most popular option for resolving the issue is to install a RFI filter on the pump. This involves dropping the tank, which is beyond my capability. So, to do the install will involve a trip to the dealership, costing around $200 for parts/installation. I've also seen a homebrew ferrite filter that can be installed at the power lead for the fuel pump, which is an option. But, I did see one posting where a guy resolved the problem by upgrading to a K40 antenna, which he said filtered the RFI. So, I'm wondering if anyone has had success eliminating fuel pump RFI with a good antenna? I'm willing to give that a try, but it will probably involve ordering one, so if there's only a small chance it will work I'll probably skip this option and go straight for the filter. Thoughts? |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Wanted: "fuel gauge"-like meter for deep-cycle batteries | General | |||
04 Grand Cherokee Fuel Pump Noise. | Antenna | |||
Noise in Ford F-150 | Homebrew | |||
Fuel Tanks and Cereal Silos as Cavity Resonators for HF | Homebrew | |||
Fuel Tanks and Cereal Silos as Cavity Resonators for HF | Homebrew |