Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hi all,
I'm trying to setup a wireless link between two Linux using ConnexLink 900 MHz serial modems (http://www.aerocomm.com/Devices/link.htm). One side (ali) is a regular PC running Debian Linux testing and the other side (SLUG) is a NSLU2 running N7IPB's OpenSlug mod (http://wetnet.net/). The AX.25 link seem to work fine, I'm able to communicate between the two sides with "call", but I can't figure out how to pass TCP/IP through the link. Anyone idea about what's going on? Here's the relevant (I think) data from both hosts: ======================================== root@SLUG:~# cat /etc/ax25/axports #Name Callsign baudrate paclen window Description connex VA2JF-0 115200 1500 1 ConnexLink 900 MHz root@SLUG:/etc/ax25# /usr/sbin/kissattach -l /dev/ttyUSB0 connex 172.25.25.2 AX.25 port connex bound to device ax0 root@SLUG:~# ifconfig ax0 ax0 Link encap:UNSPEC HWaddr AC-82-64-94-8C-40-00-FF-00-00-00-00-00-00-00-00 inet addr:172.25.25.2 Bcast:172.25.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MTU:1500 Metric:1 RX packets:301 errors:0 dropped:0 overruns:0 frame:0 TX packets:61 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 RX bytes:17345 (16.9 KiB) TX bytes:2788 (2.7 KiB) root@SLUG:~# /sbin/route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.25.25.0 0.0.0.0 255.255.255.0 U 0 0 0 ax0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 172.25.0.0 0.0.0.0 255.255.0.0 U 0 0 0 ax0 0.0.0.0 192.168.0.3 0.0.0.0 UG 0 0 0 eth0 root@SLUG:~# mheard Callsign Port Packets Last Heard VA2JF-1 connex 463 Mon Dec 19 21:08:44 root@SLUG:~# axparms -route list callsign dev mode digipeaters root@SLUG:~# ping -c 10 172.25.25.1 PING 172.25.25.1 (172.25.25.1): 56 data bytes --- 172.25.25.1 ping statistics --- 10 packets transmitted, 0 packets received, 100% packet loss ======================================== root@ali:~# cat /etc/ax25/axports # name callsign speed paclen window description connex VA2JF-1 115200 1500 1 ConnexLink 900 MHz root@ali:# kissattach -l /dev/ttyS1 connex 172.25.25.1 AX.25 port connex bound to device ax0 gfk@ali:~$ /sbin/ifconfig ax0 ax0 Link encap:AMPR AX.25 HWaddr VA2JF-1 inet addr:172.25.25.1 Bcast:172.25.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:165 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 RX bytes:0 (0.0 b) TX bytes:8085 (7.8 KiB) gfk@ali:~$ /sbin/route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.25.25.0 0.0.0.0 255.255.255.0 U 0 0 0 ax0 10.10.16.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 172.25.0.0 0.0.0.0 255.255.0.0 U 0 0 0 ax0 0.0.0.0 192.168.0.3 0.0.0.0 UG 0 0 0 eth0 gfk@ali:~$ mheard Callsign Port Packets Last Heard VA2JF connex 118 Sat Jan 28 16:44:54 gfk@ali:~$ sudo axparms -route list callsign dev mode digipeaters gfk@ali:~$ ping -c 10 172.25.25.2 PING 172.25.25.2 (172.25.25.2) 56(84) bytes of data. From 172.25.25.1 icmp_seq=1 Destination Host Unreachable From 172.25.25.1 icmp_seq=2 Destination Host Unreachable From 172.25.25.1 icmp_seq=3 Destination Host Unreachable From 172.25.25.1 icmp_seq=4 Destination Host Unreachable From 172.25.25.1 icmp_seq=5 Destination Host Unreachable From 172.25.25.1 icmp_seq=6 Destination Host Unreachable From 172.25.25.1 icmp_seq=7 Destination Host Unreachable From 172.25.25.1 icmp_seq=8 Destination Host Unreachable From 172.25.25.1 icmp_seq=9 Destination Host Unreachable From 172.25.25.1 icmp_seq=10 Destination Host Unreachable --- 172.25.25.2 ping statistics --- 10 packets transmitted, 0 received, +10 errors, 100% packet loss, time 9020ms , pipe 4 ======================================== Thanks a lot and 73, GFK's PS: I was able to make the link work with PPP, but PPP requires a full-duplex link. So I had to enable the full-duplex simulation of the modem. This cut the available bandwidth in half. I'm trying to see if AX.25 would perform better since it doesn't require full duplex. -- Guillaume Filion, ing. jr Logidac Tech., Beaumont, Québec, Canada - http://logidac.com/ PGP Key and mo http://guillaume.filion.org/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
LINUX! Not just for Guru's anymore! | Dx | |||
LINUX! Not just for Guru's anymore! | General | |||
LINUX! Not just for Guru's anymore! | Policy |