LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old April 13th 07, 10:34 PM posted to rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Apr 2007
Posts: 2
Default Help with antenna extensions

Hello all,
I am just starting to get myself into Ham Radio. I am finding
studying Morse very hard, but I really want the general license, so
I'm sticking to it.

My questions to you guys today regard antennas. I would like to have
some antennas mounted on my house roof. I live in North Vancouver,
BC, Canada, if that helps any in giving suggestions. I am curious
about what antenna is used for which frequency. I would like to be
able to transmit on the HF and VHF bands. Apparently there is
something about a 10-meter band, a 15-meter band, etc. Why are they
called meter bands? Is that like an electric "meter" or something, or
is that like the "metre" unit of distance measurement? If it is the
metre of distance, do the numbers represent how high the antenna has
to be, or how long, or what? There is no way I can have a 60 metre
antenna on my roof! Perhaps they could be coiled up or something?
Can one antenna transmit on a broad range of frequencies? How much
should I expect to pay?

Second question, with hand held 2-way radios, in North Vancouver, the
range is limited because of the hilliness. I literally live on a
mountain, and there are forests and valleys everywhere. My house is
on a bit of a hill, and standing on my balcony I can receive and
transmit very well over a good range (2-3 miles). On ground level in
the same home I can get 1 mile at most. In the basement I can get 0.5
miles. What I want to do is to stick my antenna (from the BPR-40, Mag
One by Motorola) up high on my house, and then transfer the signal,
via wire, down to my room or even the basement. The threading seems
pretty standard on the radio, but is doing this possible? Would it
screw up the "meter" of the antenna? How could I transfer the signal
without messing up the "meter"? I would like to transfer the signal a
minimum of 50 feet.

Thanks,

fogus

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Single Wire Antenna {Longwire / Random Wire Antenna} - What To Use : Antenna Tuner? and/or Pre-Selector? RHF Shortwave 20 December 31st 05 10:41 PM
Single Wire Antenna {Longwire / Random Wire Antenna} - What To Use : Antenna Tuner? and/or Pre-Selector? David Shortwave 0 December 28th 05 06:24 AM
Single Wire Antenna {Longwire / Random Wire Antenna} - What To Use : Antenna Tuner? and/or Pre-Selector? David Shortwave 3 December 27th 05 10:59 PM
Single Wire Antenna {Longwire / Random Wire Antenna} - What To Use : Antenna Tuner? and/or Pre-Selector? David Shortwave 0 December 27th 05 10:18 PM
FA: Micromint BCC52 accessories: ROM A & B Extensions, Smartime Real Time Clock Module Bob Swap 0 May 20th 04 04:09 AM


All times are GMT +1. The time now is 11:50 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017