|
ScanControl
Has anyone tried and had any luck with ScanControl with a bc780 and a
bc245? http://scan.3dtechnet.com/ -- Dwayne http://groups.yahoo.com/group/BC895/ |
I use ScanControl with my 245, and like it very much. Ken is constantly
making improvements to the program, and is in the process of adding full support for the 780. ScanControl does fully support the 785D, the 250D, and the Pro-2052, as well as the 245. It will only work for memory management on the 780 at this time. I haven't compared it to the Butel programs that seem so popular with others, but I am quite satisfied with it, and can hardly wait for the version with full support for the 780 to come out. Mark "Dwayne" wrote in message .net... Has anyone tried and had any luck with ScanControl with a bc780 and a bc245? http://scan.3dtechnet.com/ -- Dwayne http://groups.yahoo.com/group/BC895/ |
Hey you know what?? They have a free DEMO on there web-site why not
download it install it and try it?? http://scan.3dtechnet.com/download_demo.htm now theirs a concept :-) Dwayne wrote in .net: http://scan.3dtechnet.com/ -- That Other George Please send your spam to: http://webpages.charter.net/moment/ http://webpages.charter.net/moment/winjunk.htm |
Yes John we did try that and this is what we found
http://webpages.charter.net/moment/scancontrol.htm It didn't really work, i.e. it only found 1 bank on a scanner with 4 full banks of info. It thought our BC785D was a BC245XLT and didn't get anything on any of the banks. They have no street address and they want you to buy there software via PayPal, they also have no phone number.... Rule of thumb when doing business on the internet, "no street address no phone number just say no to giving them your money!" "John" wrote in : for the bc780 ARC780 is the way to go... "Dwayne" wrote in message .net... Has anyone tried and had any luck with ScanControl with a bc780 and a bc245? http://scan.3dtechnet.com/ -- Dwayne http://groups.yahoo.com/group/BC895/ -- That Other George Please send your spam to: http://webpages.charter.net/moment/ http://webpages.charter.net/moment/winjunk.htm |
It's junk don't bother with it. We could not get the junk to work, i.e. it
keeps shuting banks 1 and 2 off, puts them in the skip mode.. It would not find our BC785D at all, it keeps saying it's a BC245XLT. It will not import the info from the TrunkStar780 data file or the Arc780 data file for frequencies. It only works in the c:\program files\ScanControl dir of you install it anywhere eles it does not work, that sucks big time!! So we did what we do with all junk, i.e. put it in the C File :-) http://webpages.charter.net/moment/scannertesting.htm Dwayne wrote in .net: In article , says... Hey you know what?? They have a free DEMO on there web-site why not download it install it and try it?? http://scan.3dtechnet.com/download_demo.htm now theirs a concept :-) Dwayne wrote in .net: http://scan.3dtechnet.com/ Hey you know what?? I did and was having problems with it. I am now working with them to solve it. -- That Other George Please send your spam to: http://webpages.charter.net/moment/ http://webpages.charter.net/moment/winjunk.htm |
That Other George wrote in message ...
Hey you know what?? They have a free DEMO on there web-site why not download it install it and try it?? http://scan.3dtechnet.com/download_demo.htm now theirs a concept :-) Dwayne wrote in .net: http://scan.3dtechnet.com/ I have used it for my BC250D and it worked flawlessly. I am happy to vouch for this program. It's great! |
In article , says...
If you clicked the link, i.e. http://webpages.charter.net/moment/scancontrol.htm you would see the screen snapshot of it showing the baud rate and also showing no banks 1 or 2, They go on and on about a monitor but we could not find it any where on the demo we downloaded on August 2, 2003 and tested for this last week. A really big problem with it is you can't install it on the D:\ drive. I don't want scanner programs running on my C:\ drive I want them in D:\Scanner\Software but when we did that it would not even start, i.e. we got errors stating it could not find a .dll file. All in all ARC780 or TrunkStar780 are both 10,000% better programs. and for the BC780XLT the little ScanPro 780 program from BlackBag does it just fine, and if you don't want to spen a dime go get Java780 at http://www.qsl.net/ke9zm/java780/java780.html It works it's free what more could you ask for :-) http://webpages.charter.net/moment/scannertesting.htm I agree with you on Trunkstar780 and ARC780. I use Trunkstar780 for all my logging and ARC780 for editing. I find java780 to be a silly little program because it don't allow you to edit anything. ScanPro is the only program I don't have for the 780 so I cant say anything about it. You forgot to mention Andy's 780 programmer which is a very good and free program. If you never heard of it then you can get it here http://www.angelfire.com/electronic/.../download.html The only thing about Andy's program is that you have to have excel in order to use it. I don't know why your having the problems you are with the 785 and ScanControl but I know they are working out all the bugs. Give it a couple weeks and maybe try it again. Who knows you might like it when it works. -- Dwayne http://groups.yahoo.com/group/BC895/ |
Dwayne wrote in
.net: In article , says... If you clicked the link, i.e. http://webpages.charter.net/moment/scancontrol.htm you would see the screen snapshot of it showing the baud rate and also showing no banks 1 or 2, They go on and on about a monitor but we could not find it any where on the demo we downloaded on August 2, 2003 and tested for this last week. A really big problem with it is you can't install it on the D:\ drive. I don't want scanner programs running on my C:\ drive I want them in D:\Scanner\Software but when we did that it would not even start, i.e. we got errors stating it could not find a .dll file. All in all ARC780 or TrunkStar780 are both 10,000% better programs. and for the BC780XLT the little ScanPro 780 program from BlackBag does it just fine, and if you don't want to spen a dime go get Java780 at http://www.qsl.net/ke9zm/java780/java780.html Well after spending 20min of reading and clicking the only thing we found on that page was 20 links to: "Uniden Bearcat Trunktracker Scanning Tips & Tricks" Every time we thought we could download a program it just took us to another page... So we gaveup.. after jumping though 4 or 5 hoops we where done... We all hate web-sites that say "download here" you click it and it takes you to another page you have to find another link to click and so on and so on.. we just don't bother!! It works it's free what more could you ask for :-) http://webpages.charter.net/moment/scannertesting.htm I agree with you on Trunkstar780 and ARC780. I use Trunkstar780 for all my logging and ARC780 for editing. I find java780 to be a silly little program because it don't allow you to edit anything. ScanPro is the only program I don't have for the 780 so I cant say anything about it. You forgot to mention Andy's 780 programmer which is a very good and free program. If you never heard of it then you can get it here http://www.angelfire.com/electronic/.../download.html The only thing about Andy's program is that you have to have excel in order to use it. I don't know why your having the problems you are with the 785 and ScanControl but I know they are working out all the bugs. Give it a couple weeks and maybe try it again. Who knows you might like it when it works. -- That Other George Please send your spam to: http://webpages.charter.net/moment/ http://webpages.charter.net/moment/winjunk.htm |
http://www.qsl.net/ke9zm/java780/java780r11.zip
try this "That Other George" wrote in message ... Dwayne wrote in .net: In article , says... If you clicked the link, i.e. http://webpages.charter.net/moment/scancontrol.htm you would see the screen snapshot of it showing the baud rate and also showing no banks 1 or 2, They go on and on about a monitor but we could not find it any where on the demo we downloaded on August 2, 2003 and tested for this last week. A really big problem with it is you can't install it on the D:\ drive. I don't want scanner programs running on my C:\ drive I want them in D:\Scanner\Software but when we did that it would not even start, i.e. we got errors stating it could not find a .dll file. All in all ARC780 or TrunkStar780 are both 10,000% better programs. and for the BC780XLT the little ScanPro 780 program from BlackBag does it just fine, and if you don't want to spen a dime go get Java780 at http://www.qsl.net/ke9zm/java780/java780.html Well after spending 20min of reading and clicking the only thing we found on that page was 20 links to: "Uniden Bearcat Trunktracker Scanning Tips & Tricks" Every time we thought we could download a program it just took us to another page... So we gaveup.. after jumping though 4 or 5 hoops we where done... We all hate web-sites that say "download here" you click it and it takes you to another page you have to find another link to click and so on and so on.. we just don't bother!! It works it's free what more could you ask for :-) http://webpages.charter.net/moment/scannertesting.htm I agree with you on Trunkstar780 and ARC780. I use Trunkstar780 for all my logging and ARC780 for editing. I find java780 to be a silly little program because it don't allow you to edit anything. ScanPro is the only program I don't have for the 780 so I cant say anything about it. You forgot to mention Andy's 780 programmer which is a very good and free program. If you never heard of it then you can get it here http://www.angelfire.com/electronic/.../download.html The only thing about Andy's program is that you have to have excel in order to use it. I don't know why your having the problems you are with the 785 and ScanControl but I know they are working out all the bugs. Give it a couple weeks and maybe try it again. Who knows you might like it when it works. -- That Other George Please send your spam to: http://webpages.charter.net/moment/ http://webpages.charter.net/moment/winjunk.htm |
| All times are GMT +1. The time now is 08:44 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com