IC-R5 programmer
 

I bought this on Ebay, and the software is fine except that it will not
successfully download the frequency list to the radio. I get the CL ERR
message right at the end of the download. Does anyone else have this
problem?

On Tue, 18 May 2004 22:22:24 GMT, "Bill Chernoff"
wrote:

I bought this on Ebay, and the software is fine except that it will not
successfully download the frequency list to the radio. I get the CL ERR
message right at the end of the download. Does anyone else have this
problem?

I use the Icom software to program the IC-R5. I had a similar error
message when I entered scanning frequencies in the 800 MHz range.
When I sent the list to the IC-R5 from the software, the upload would
get close to completion then the error message would pop up.

When I removed those frequencies - I think it was 821 MHz and so on- I
was able to upload to the IC-R5 without an error message.

I think I may have solved this. In my initial attemps to download the list
to the radio, I don't think I started with a FileNew, and I was just adding
to and editting a (somehow) corrupted data set. If I "new" it first, then
edit it, it will download without error to the radio. I have only put in 25
or so local airport freqs, and nothing at all in the 800 MHz range at all,
so that problem might still be there.