| Home |
| Search |
| Today's Posts |
|
#1
November 5th 06, 04:51 PM
posted to rec.radio.swap
|
|||
|
|||
Astro Spectra - How to convert remote mount to dash
I have a D04RKH9PW7ANSP01.
I received it with the remote head, and want to put the head right onto the body for dash mount. I took the head apart. The housing is HLN6432B and the back of the face is HLN6396F (on the circutry). I took the double 25pin faceplate off the body (HLN6344E) and it connects to the body with long pins. How can I get this head connected to the body? Any help would be appreciated. |
|
#2
November 5th 06, 10:19 PM
posted to rec.radio.swap
|
|||
|
|||
|
Astro Spectra - How to convert remote mount to dash
You need the Control Head Interface board for the dash mount
configuration. I has the long pins that connect the board to the Comand board, and the jack for the Control Head plug, on a circuit board. NOT the same as the Spectra...... |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
