yaesu twins fl 101 fr101
 

rigs work fine seperately but when in transcieve mode the transmitter is off
about 3khz.
how do i correct this problem??

This particular setup does not send the hf injection from one to the other,
therefore, each is operating off its own xtal oscillator at all times.
There is a control on one or the other (I can't remember which) to zero so
they will actually transceive.
"Slade Sowers" wrote in message
hlink.net...
rigs work fine seperately but when in transcieve mode the transmitter is
off
about 3khz.
how do i correct this problem??

This particular set of radios does not send the hf injection from one to the
other for transceiving purposes, therefore each unit continues to operate
off its own internal xtal oscillator at all times. One unit or the other
has a control on it to allow zeroing one against the other for transceiving
purposes--I don't remember which as it has been too long since I had the
equipment. Note that it will be necessary to perform the zeroing each time
you change bands.
"Slade Sowers" wrote in message
hlink.net...
rigs work fine seperately but when in transcieve mode the transmitter is
off
about 3khz.
how do i correct this problem??