Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Is there a way to program this radio to do scan in squelched mode? I have only
seen that scan is in carrier mode and you hear everybody, wanted and unwanted. JOE |
#2
![]() |
|||
|
|||
![]()
PL or DPL ect.
"MSDBM" wrote in message ... Is there a way to program this radio to do scan in squelched mode? I have only seen that scan is in carrier mode and you hear everybody, wanted and unwanted. JOE |
#3
![]() |
|||
|
|||
![]()
Yes it will but scan will stop on priority channels regardless
of PL/DPL code. Speaker will stay muted unless correct PL/DPL is being received. On Non-Priority channels it will scan until proper PL is detected. MSDBM wrote: Is there a way to program this radio to do scan in squelched mode? I have only seen that scan is in carrier mode and you hear everybody, wanted and unwanted. JOE |
#4
![]() |
|||
|
|||
![]()
you have to set the scan in RSS to coded squelch scan, then you have to either
make sure the mic is grounded or find someone with the LAB RSS that can change the rules for microphone grounding. There's an option there that lets you stay in coded squelch mode regardless of the ground status on the mic. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS- 2way Service/Maint/Operator Manuals !!!! | Swap | |||
FS- 2way Service/Maint/Operator Manuals !!!! | Boatanchors | |||
FS- 2way Service/Maint/Operator Manuals !!!! | Swap | |||
FS- 2way Service/Maint/Operator Manuals !!!! | Boatanchors | |||
FS- 2way Service/Maint/Operator Manuals !!!! | Swap |