I'm working on a simple audio processing system using the dsPIC30F4013. It's
mainly intended for amateur radio use, and I've formed a Yahoo group for
people interested in using dsPICs for radio applications:

http://groups.yahoo.com/group/radio_dspic/

Leon
--
Leon Heller, G1HSM
http://www.geocities.com/leon_heller

"Leon Heller" writes:

I'm working on a simple audio processing system using the dsPIC30F4013. It's
mainly intended for amateur radio use, and I've formed a Yahoo group for
people interested in using dsPICs for radio applications:

http://groups.yahoo.com/group/radio_dspic/

Nice resource! Thanks Leon.
--
Randy Yates
Sony Ericsson Mobile Communications
Research Triangle Park, NC, USA
, 919-472-1124

Randy Yates writes:

"Leon Heller" writes:

I'm working on a simple audio processing system using the dsPIC30F4013. It's
mainly intended for amateur radio use, and I've formed a Yahoo group for
people interested in using dsPICs for radio applications:

http://groups.yahoo.com/group/radio_dspic/

Nice resource! Thanks Leon.

I meant that for your other post regarding the EDN information on DSPs.
--
Randy Yates
Sony Ericsson Mobile Communications
Research Triangle Park, NC, USA
, 919-472-1124

can you believe it I just ordered a AT90S2313 development board from
futurlec after going through your site. I was hovering about to make a
decision on that. strange, how decisions can be triggered.

"Neo" wrote in message
oups.com...
can you believe it I just ordered a AT90S2313 development board from
futurlec after going through your site. I was hovering about to make a
decision on that. strange, how decisions can be triggered.

Bear in mind that the '2313 is obsolete, and has been replaced by the
Tiny2313 - cheaper, faster and with lots more stuff on the chip. They are
pin-compatible.

Leon
--
Leon Heller, G1HSM
http://www.geocities.com/leon_heller

Leon,
This is my first board, so if you dont mind can you suggest what other
accessories I need to order along with the board to start working on a
project.

"Neo" wrote in message
ups.com...
Leon,
This is my first board, so if you dont mind can you suggest what other
accessories I need to order along with the board to start working on a
project.

Does it come with a programmer? If not, you will have to buy or make one.
The SP12 programmer is very simple, I've used it for years:

http://www.xs4all.nl/~sbolt/e-spider_prog.html

I'd also get a few spare 2313 chips.

Leon

thanks.