| Home |
| Search |
| Today's Posts |
|
#1
January 29th 04, 09:51 AM
|
|||
|
|||
antenna modeling question
the modeling programs i use, eznec & mmana seem
to have no way to model an antenna with it's elements made of nothing but cu, and al. how do you model an antenna made of coax? what am i missing? larry kd5foy |
|
#2
January 29th 04, 04:52 PM
|
|||
|
|||
|
On Thu, 29 Jan 2004 08:51:44 GMT, "larry d clark"
wrote: the modeling programs i use, eznec & mmana seem to have no way to model an antenna with it's elements made of nothing but cu, and al. how do you model an antenna made of coax? what am i missing? My copy of EZNEC also has tin or zinc plus "user defined". So you could enter any value resistivity and relative permeability you want. Danny, K6MHE |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| antenna modeling question | Antenna | |||
| Mobile Ant L match ? | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
Linear Mode
