VK2KC wrote:
Hello all,
I do appreciate the input, seems like its not such a good idea!


It's not the best idea, but don't think it's not a good idea. If you use
a broad definition of meander, you can have drooping ends, of one time I
made an antenna that was sort of "Z" shaped.

It's making antenna for the space you have available.

Just to clarify the actual construction details, the configuration would be
in a dipole.

The 1/4 lambda wire would be wound on a form which has slots cut into the
periphery of an insulator to accommodate the wire and the form would be
300mm (12") in diameter, the wire would be wound from top to bottom of the
form until all the wire is wound on the form. I envisage a 75mm (3") gap
between each slot, maybe more depending on the distance between the circular
insulators, around 1500mm (5 ft).

Sounds like a form of slinky antenna to me. You wouldn't end up with a
quarter wavelength on each side, it would be less due to inductance.

What frequency are you looking at here?


- 73 de Mike N3LI -