I'm building a new ham shack location for my company's ham radio club, and I
would like to hear some suggestions from our group about what antennas would
be best for our location. Here's some details:

We want to provide for all HF bands first.
Maximum power will be about 500 watts, all-tube gear.
Location is San Diego, CA, USA.
The shack is at ground level, immediately against a two-story building with
a concrete curtain wall about 50 feet high.
The top edge of the concrete wall is about 6 feet above the building roof.
The building roof is a flat metal pan, about 300 feet by 300 feet.
We have a BWD-90 160 M through 6 M folded dipole.
We have an IAC 40 M Double Bazooka antenna.
We have about 1000 feet of RG-213U coax.
We do not have a remote antenna match network.

We plan to place the folded dipole about 6 feet above the edge of the
concrete wall, running N/S, to initially get us on the air.

The Double Bazooka might be strung NW/SE, to give us a maximum lobe toward
the rest of the US & Australia.

So, what should we do next? A long-wire is one possibility, but we can't get
much more than about 10 feet above the metal pan on that building roof.
Perhaps a horizontal loop, standing maybe 8 feet above that pan, for NVIS?
Perhaps a vertical multi-bander (what a ground plane!)

What would you do?

Thanks,

Ed
WB6WSN

Tell your Company, that in the interest of public relations, it important
for the ham club to reflect a positive image, and you want BIG BUCKS.

Tam/WB2TT
"Ed Price" wrote in message
news:NV96b.11724$QT5.3177@fed1read02...
I'm building a new ham shack location for my company's ham radio club, and
I.............................