how to feed a planar monopole antenna using ie3d

May 10th 05, 08:39 PM

skdas

Posts: n/a

how to feed a planar monopole antenna using ie3d

can any one guide me in the way to feed a planar monopole antenna using
a probe(the method for MSA is known to me). The 3-D view shows as if
the probe is connected but actually on simulation i could make out that
it is not connected.so,the querry is how to connect and how to check if
the probe is connected

s.k.das

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inverted ground plane antenna: compared with normal GP and low dipole.	Serge Stroobandt, ON4BAA	Antenna	8	February 24th 11 11:22 PM
Discone antenna plans	[email protected]	Antenna	13	January 15th 05 12:51 AM
Mobile Ant L match ?	Henry Kolesnik	Antenna	14	January 20th 04 05:08 AM
QST Article: An Easy to Build, Dual-Band Collinear Antenna	Serge Stroobandt, ON4BAA	Antenna	12	October 16th 03 08:44 PM
Outdoor Scanner antenna and eventually a reference to SW reception	Soliloquy	Shortwave	2	September 29th 03 05:04 PM

All times are GMT +1. The time now is 03:25 PM.

Menu

About Us