Paolo, IK1ZYW, informs me my programs will run in a LINUX, DOSEMU
environment. I was not aware of this.

He has tried it with Dosemu 1.2.2.0

Thanks very much Paolo.
----
Reg, G4FGQ

Reg:

Yes, "wine" is another way in which you can run almost any windows
application (even windows itself--the operating system!!! on linux)...

But, if they can use a compiler, I notice you also have some source code on
your page... and they could also compile this directly on a linux system...

Here is a link to one compiler which can be used to compile borland
turbopascal souce directly on a linux (and unix) system--and you end up with
a linux executable as opposed to a windows executable...
http://www.musikwissenschaft.uni-mai...tply/tply.html


Warmest regards,
John
--
Sit down the six-pack!!! STEP AWAY!!! ...and go do something...

"Reg Edwards" wrote in message
...
| Paolo, IK1ZYW, informs me my programs will run in a LINUX, DOSEMU
| environment. I was not aware of this.
|
| He has tried it with Dosemu 1.2.2.0
|
| Thanks very much Paolo.
| ----
| Reg, G4FGQ
|
|

John,

You sent me an e-mail. I replied. The reply was returned undelivered
to me with a message about authentication which I don't understand. So
let's try this route.

It is possible to dump the program results screen to printer by using
the "PAINT" program which comes with Windows. But that's ALL I know.
Can you figure a way of doing a screen dump to printer? I've tried but
failed.

Interference with a program's source code is strictly barred.

What is your particular interest in Vertune? Send me an e-mail and I
will try once again to reply in like manner. If it doesn't work I
will return to here.
----
Reg, G4FGQ

Reg:

Would you be so kinda as to allow me to, with my humble efforts, to write a
procedure in turbo pascal which I am thinking of... which will open a .txt
file, write variables to it (you may fill in your varibles as you please--I
need NOT be even aware of them to do this--will just supply generic variable
names such as "x", "y", "z"--which you replace with the real variable
names--and compile as you do), save and close this file--leaving a very
small text file which can be exchanged and discussed as necessary (even
posted here)?... and email the procedure in SOURCE CODE to you, you can
review it and act upon it as you please?

If so, give me a bit of time... I must remove a few other things off my
desk first... and load up turbo pascal...

Also, I will supply you with another email address immediately... I find
your exchanges too valuable... if you have patience, we will work something
out here... sorry about the returned mail... I am at a loss to the reason
at this time... will start looking here... thank you for pointing this out
to me...

Warmest regards,
John
--
Marbles can be used in models with excellent results! However, if forced
to keep using all of mine up... I may end up at a disadvantage... I seem
to have misplaced some already!!!


"Reg Edwards" wrote in message
...
| John,
|
| You sent me an e-mail. I replied. The reply was returned undelivered
| to me with a message about authentication which I don't understand. So
| let's try this route.
|
| It is possible to dump the program results screen to printer by using
| the "PAINT" program which comes with Windows. But that's ALL I know.
| Can you figure a way of doing a screen dump to printer? I've tried but
| failed.
|
| Interference with a program's source code is strictly barred.
|
| What is your particular interest in Vertune? Send me an e-mail and I
| will try once again to reply in like manner. If it doesn't work I
| will return to here.
| ----
| Reg, G4FGQ
|
|

On Fri, 13 May 2005 05:46:45 -0400, Reg Edwards
wrote:

Paolo, IK1ZYW, informs me my programs will run in a LINUX, DOSEMU
environment. I was not aware of this.

He has tried it with Dosemu 1.2.2.0

Thanks very much Paolo.
----
Reg, G4FGQ


Hi Reg,
Yes it works quite well with Dosemu on my Debain linux machine.. but it
would be much easier if you or someone could port them directly to linux.
73 Dave KC1DI



--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Hi Reg,
Yes it works quite well with Dosemu on my Debain linux machine.. but
it
would be much easier if you or someone could port them directly to
linux.
73 Dave KC1DI

==============================

Dave,

Yes, it would be much easier for you and the rest of the crowd.

But it would occupy thousands of hours of hard work for me. And
there's not that much remaining time. In any case the job would be
unpaid. Unless, of course, you would like to organise a rich charity
on my behalf.

My working days are over. I would much prefer to spend my time
writing new programs. It's a far more satisfying hobby. ;o) ;o)
----
Reg, G4FGQ

Reg Edwards wrote:
Paolo, IK1ZYW, informs me my programs will run in a LINUX, DOSEMU
environment. I was not aware of this.

He has tried it with Dosemu 1.2.2.0

Hi Reg,

Of course, they run flawless. They always did so, even on very old
"Linux DOS emulator 0.98.3.0 $Date: 98/11/15 $".
Fine job. I like Your handy tools very much.

Congrats and _mni_ tnx Yours
Gerald Dickinger OE5GDL