Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
"Gary Boyer" wrote in message
... I can not get the reson. freq. in the band..for example..everything is low in frequency: 10 Meters center freq. 27.262 MHz. 15 Meters " " 20.895 MHz. 20 Meters " " 14.653 MHz. The Vertical is ground mounted with radials.....,manufact. spacing cannot be adjusted any further...I used a mfj ant. analyzes. to measure the reson. freq,..anyone else had this problem..if so, how did you fix it...any suggestions would be most appreciated...tnx.....Gary..K8BY Gary - According to the data you provided: 10 and 15 meters -- length is "too long" 20 meters - length is "too short" [Remember that physical length and electrical length are different values with this antenna -- because of the usage of traps] http://www.new-tronics.com/main/html...hf_6_band.html I would suggest reading K5RWK's column in "The Chawed Rag" newsletter on installing the Hustler 6BTV vertical Here is that web link: http://www.k5rwk.org/CR200211.pdf Greg w9gb |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|