Here are some items for sale. Prices do not include shipping. I will
ship overseas.

Swan 600R Custom Receiver with SS-16B Filter....$350 plus shipping
This radio covers 80-10 meters and matches the Swan 600T transmitter.
The custom model comes with the Noise Blanker, Variable Notch Filter,
and 16 pole SS-16B SSB filters.The radio is in excellent condition and
receives well. The insides of the unit are also very clean. The power
transformer has been replaced and the new one can be seen in the last
photo. The only other issue is that one of the disks is missing from one
of the knobs.
http://members.cox.net/radiodx3/swan600r.JPG
http://members.cox.net/radiodx3/swan600r4.JPG
http://members.cox.net/radiodx3/swan600r3.JPG

Rare” National Radio NC-45.............$125 plus shipping
This is an 8 tube receiver made from 1941-1945 covering 550 kHz to 30
MHz. Most models made were made the NC-45 which is an ac/dc receiver.
The NC-45A has a transformer operated power supply. This radio does work
and receives signals on all bands but it really need to be recapped and
aligned. Cosmetically OK but also needs to be cleaned up. It has all of
the correct knobs and I do not find any extra holes. The insides look
OK but also need to be cleaned up. One interesting thing that I noticed
is that the main tuning and bandspread knobs are both weighted, rather
heavy and appear to have come from the factory that way. I do not have a
manual but they are available from several sources on the web. I will
include a schematic.
http://members.cox.net/radiodx3/nc45rcvr.JPG
http://members.cox.net/radiodx3/nc45rcvr4.JPG
http://members.cox.net/radiodx3/nc45rcvr6.JPG

Kenwood TS-520 Transceiver...............$120 plus shipping
The unit is in very nice shape cosmetically and is compete. The receiver
works very well but the transmitter is not working. The insides are
complete and in good condition.
http://members.cox.net/radiodx5/ts520.JPG
http://members.cox.net/radiodx5/ts5204.JPG

Motorola 51X19 Wooden Table Radio-Brown Plaskon Grill...$100 plus shipping
This is a 5 tube radio from 1942. New electrolytics and most of the
paper capacitors have been replaced. The set plays well. Cosmetically it
is in in nice shape although their is a small chip out of the top near
the edge which can be seen in the photo and the plaskon grill has been
carefully glued where it had cracked.
http://members.cox.net/radiodx5/motorola51x19.JPG
http://members.cox.net/radiodx5/motorola51x194.JPG

Ten-Tec Power Mite PM3 and Matching AC Supply........$200 plus shipping
TenTec Power Mite and Matching AC Supply with instructions and original
box. This is a late 1960's - early 1970's 2 band QRP transceiver that
covers 40 and 20 meters, CW only. Output power was measured at a couple
of watts. The radio works and is in pretty nice shape with a few small
scratches.
http://members.cox.net/radiodx5/tentec_power_mite.JPG

Harman Kardon A-10 Allegro Vintage Hi-Fi Amplifier....$60 plus shipping
This is a mono unit with a pair of two 12AX7's driving a pair of 6BQ5's.
The rectifier tube is a 6V4. I powered up the unit and it has bad hum so
it needs new electrolytic caps. The unit is in nice shape and includes
the original box but no manual.
http://members.cox.net/radiostuff9/allegro_hk.JPG
http://members.cox.net/radiostuff9/allegro_hk3.JPG

Heathkit IM-10 VTVM..........$20 plus shipping
The unit is working. It does not include test leads. The test lead uses
a standard 1/4 inch plug which is included and banana plugs which can be
obtained from Radio Shack.
http://members.cox.net/radiodx3/heathim102.JPG

Big Steel Louvered Cabinet - 19 inch Rack Panel for Homebrew xmtr or
Linear Amp.........$50 plus shipping
This enclosure has a hinged top also. The dimensions are 22 inches long
by 10.5 inches high x 16 inches deep. The size of the front panel that
will fit this is 19 inches wide by 8.5 inches high. Other than some
dust, this is in excellent condition and would be a great enclosure for
a homebrew ham radio transmitter or linear amplifier.
http://members.cox.net/radiodx3/big19inchcabinet.JPG
http://members.cox.net/radiodx3/big19inchcabinet2.JPG
http://members.cox.net/radiodx3/big19inchcabinet3.JPG
http://members.cox.net/radiodx3/big19inchcabinet4.JPG

Steel Project Enclosure for Transmitter or Receiver....$15 plus shipping
A steel box which would make a nice enclosure for a homebrew receiver,
transmitter or antenna coupler. The dimensions are 15 inches wide by 9
inches high by 11.5 inches deep. Their are no dents or dings, it just
needs a cleaning.
http://members.cox.net/radiodx3/box2.JPG

Systron Donner Digital Multimeter Model 7241A (DVM)............$20 plus
shipping
This unit will measures ac and dc voltage, dc and ac current and
resistance up to 20 Mohms. This is in nice shape and is working. I
checked it with a dc power supply and a resistance decade box and the
readings look good. It also has a tilt up stand. Uses a standard
computer type power cord which is included.
http://members.cox.net/radiodx5/systron_dvm.JPG
http://members.cox.net/radiodx5/systron_dvm3.JPG

General Electric YGA-4 Audio Oscillator.........$20 plus shipping
This has been tested and is a working unit.
http://members.cox.net/radiodx3/ge_audiogen.JPG
http://members.cox.net/radiodx3/ge_audiogen2.JPG

73 and thanks for looking......Dave

Please reply direct. Remove nospam from e-mail address when replying
--
************************************************** *********
Dave N7RK Boatanchors Home Page: http://members.cox.net/n7rk
Phoenix, Arizona *DXCC Honor Roll* *WAZ#22 - 75 Meter SSB*

ex-XE2/N7RK, N7RK/ZB2, VK2ERK, ZM0AJN, WB6NRK, WN6IWX

Boatanchor and Antique Radio Collector