Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]() Anybody have the footprint dimensions (width and depth) for the Hammarlund HQ-180 in its cabinet? Thanks... |
#2
![]() |
|||
|
|||
![]() C. J. Clegg wrote: Anybody have the footprint dimensions (width and depth) for the Hammarlund HQ-180 in its cabinet? Thanks... ============================== 19" wide, 13" deep, 11" high. --Ed |
#3
![]() |
|||
|
|||
![]()
On Sun, 21 Jan 2007 18:21:20 -0800, Ed Engelken wrote:
19" wide, 13" deep, 11" high. --Ed Good afternoon, Ed. The 19" wide is the panel (standard 19" panel width), right? Won't the cabinet be a bit wider than that, perhaps 1/2 to 1 inch wider each side? |
#4
![]() |
|||
|
|||
![]()
If you take the cabinet off, leaving the receiver and the front panel,
it will slide into a standard 19" rack opening. The left and right sides of the front panel will hide the side rails of the rack. I have a "rack-mounted" HQ-180AC, here. It sits on a shelf within the rack and, with the exception of the rounded corners of the receiver front panel, it appears like a custom fit. One other consideration is that the "standard" height for many/most MIL and Commercial receivers (R-390, 390A, SP-600, R-274/SX-73, et al is 10 1/2". The HQ-180-series receivers, and in fact the other large cabinet Hammarlunds will fit this rack size. Note also that, unfortunately, the above Hammarlund receivers will NOT fit in a rack with the cabinet, in tact, unless the rack side mounting rails are removed. This can be done in some racks; others, not. C. J. Clegg wrote: On Sun, 21 Jan 2007 18:21:20 -0800, Ed Engelken wrote: 19" wide, 13" deep, 11" high. --Ed Good afternoon, Ed. The 19" wide is the panel (standard 19" panel width), right? Won't the cabinet be a bit wider than that, perhaps 1/2 to 1 inch wider each side? |
#5
![]() |
|||
|
|||
![]() C. J. Clegg wrote: On Sun, 21 Jan 2007 18:21:20 -0800, Ed Engelken wrote: 19" wide, 13" deep, 11" high. --Ed Good afternoon, Ed. The 19" wide is the panel (standard 19" panel width), right? Won't the cabinet be a bit wider than that, perhaps 1/2 to 1 inch wider each side? ========================================= The outside cabinet width is 19" including the "rim." The full depth is 13" and the height including the "feet" is 11". Without the feet, the height is 10.5". --Ed |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Need SX-62 Dimensions | Boatanchors | |||
Dimensions of Hallicrafters R-12 speaker cabinet? | Boatanchors | |||
Antenna Specs / Dimensions: Help Needed | Antenna | |||
QSL CARD Dimensions ? and FYI | Dx | |||
Sommer XP-50 few dimensions ? | Antenna |