I have aquired a Loudenboomer amplifier with out power supply. Could some
give me some hints on where to start building or acquiring a power supply
for this unit? The first problem I have encountered is the amps and volts
of the plate transformer.

Thanks,

Paul P.

Paul,

I have a non working supply and amp. There is no tube and one of the 50 watt
resistors is broken in half. I do have two replacement resistors I got from
Newark Electronics. Where are you located? The shipping may make if
uneconomical because of the weight and packing. The supply has had the 866
rectifiers removed and solid state devices installed. Also the filament
transformer for those tubes has also been removed. I can send a picture or
two if that helps.

let me know what you think.

73,

Mike-K5VSE

Formerly WB6VSE, Senior Tech. Amateur Division
SBE/Linear Systems, Watsonville, CA
On 3922 nearly every night.
WEB Site: http://members.tripod.com/~sjsharks/index.html
Restoring and using Drake Radios, TR-4, TR-4C, RV-4C,
Drake Twins: "C" line, W-4 Wattmeter, L4-B amplifier
APA 220, USS Okanogan, LSD31, USS Point Defiance
All email scanned with Norton 2008
"In God We Trust"