[justme]

I need to find the internal ram board for an Icom 745/751. I broke
mine by pushing too hard when reinstalling.

Money is tight, as we all know. Do you have one that I can buy?

I sure would appreciate it.

Thank you.

[Scott Dorsey]

justme wrote:

I need to find the internal ram board for an Icom 745/751. I broke
mine by pushing too hard when reinstalling.

Money is tight, as we all know. Do you have one that I can buy?

I sure would appreciate it.

I'm not sure that the 745 is a boatanchor... but have you considered epoxy
and tack-soldering hookup wire jumpers across the break?
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[justme]

Thanks for the reply, Scott. There is hardly a circuit board made
that I won't attempt to repair. However, this one is cracked in so
many places, under chips, front and back that it is crazy to try it.
However, if I don't get a replacement, I am crazy enough to try it as
a very, very last resort.

I wouldn't even mind too greatly to make my own pcb.

Take care.On 30 Sep 2011 09:40:56 -0400, (Scott
Dorsey) wrote:

justme wrote:

I need to find the internal ram board for an Icom 745/751. I broke
mine by pushing too hard when reinstalling.

Money is tight, as we all know. Do you have one that I can buy?

I sure would appreciate it.

I'm not sure that the 745 is a boatanchor... but have you considered epoxy
and tack-soldering hookup wire jumpers across the break?
--scott

[[email protected]]

Since you have not gotten a REAL answer, I will offer two suggestions:

http://www.piexx.com/ sells a replacement board for $59.

The page with the information is
http://www.piexx.com/index.php?main_...oducts_ id=26

You could also try http://www.willcoele.com/ which updates your
existing board for $53, but this may not be an option since your board
is damages.

I "loaned" my brother my 751 and he bought the Piexx board. He
installed it in about 5 minutes and is good to go. Maybe he has the
old one, but it would be quicker, and probably cheaper, to go with the
Piexx.

Good luck, and 73.
WM6M


On Thu, 29 Sep 2011 14:43:45 -0500, justme wrote:


I need to find the internal ram board for an Icom 745/751. I broke
mine by pushing too hard when reinstalling.

Money is tight, as we all know. Do you have one that I can buy?

I sure would appreciate it.

Thank you.

[G. Beat]

On Oct 23, 1:40*pm, wrote:
Since you have not gotten a REAL answer, I will offer two suggestions:

http://www.piexx.com/sells a replacement board for $59.

*The page with the information ishttp://www.piexx.com/index.php?main_page=product_info&cPath=8&product.. .

You could also tryhttp://www.willcoele.com/which updates your
existing board for $53, but this may not be an option since your board
is damages.

I "loaned" my brother my 751 and he bought the Piexx board. *He
installed it in about 5 minutes and is good to go. *Maybe he has the
old one, but it would be quicker, and probably cheaper, to go with the
Piexx.

Good luck, and 73.
WM6M



On Thu, 29 Sep 2011 14:43:45 -0500, justme wrote:

I need to find the internal ram board for an Icom 745/751. *I broke
mine by pushing too hard when reinstalling.

Money is tight, as we all know. *Do you have one that I can buy?

I sure would appreciate it.

Thank you.- Hide quoted text -

- Show quoted text -

Icom EX-314 replacement
http://www.ab4oj.com/icom/w9gb.html