Greetings again..

I found the problem with the audio output chip, so that problem has been
solved...

Does anyone have a copy of the icom 22s.. this is the diode matrix version.
the manual I have, ic22, has the crystal board version..

I am looking for someone who has a computer scanner who could scan the
schematic drawing and email it to me. My photo program and scanner can
handle .tif and jpg formats and possibly other but I am only familiar with
those two..

If you can, would you scan the page and send it to me uncrushed.. I scanned
a blank, 8.5 by 11 inch page and it took about 120k.. my isp can handle
that...

Larry ve3fxq

On Sun, 30 Jan 2005 09:00:39 -0500, larry wrote:

Greetings again..

I found the problem with the audio output chip, so that problem has been
solved...

Does anyone have a copy of the icom 22s.. this is the diode matrix version.
the manual I have, ic22, has the crystal board version..

I am looking for someone who has a computer scanner who could scan the
schematic drawing and email it to me. My photo program and scanner can
handle .tif and jpg formats and possibly other but I am only familiar with
those two..

If you can, would you scan the page and send it to me uncrushed.. I scanned
a blank, 8.5 by 11 inch page and it took about 120k.. my isp can handle
that...

Larry ve3fxq


Hello again..
Try the website below,it has the manual and schematic in PDF form.
I found this by typing :IC-22S schematic in Google and searched under
groups.The schematic is not easy to read, but it is better tham none.

http://www.geocities.com/ks3y/Projects.htm

73 de Eskay..

On Sun, 30 Jan 2005 09:00:39 -0500, larry wrote:

Greetings again..

I found the problem with the audio output chip, so that problem has been
solved...

Does anyone have a copy of the icom 22s.. this is the diode matrix version.
the manual I have, ic22, has the crystal board version..

I am looking for someone who has a computer scanner who could scan the
schematic drawing and email it to me. My photo program and scanner can
handle .tif and jpg formats and possibly other but I am only familiar with
those two..

If you can, would you scan the page and send it to me uncrushed.. I scanned
a blank, 8.5 by 11 inch page and it took about 120k.. my isp can handle
that...

Larry ve3fxq


I now have a good copy of the schematic, will send it to you on request.
73 de Eskay..

Greetings, again...

One of the responders, to this message, was kind enough to send me a .pdf
file of the icom 22s schematic... again, to him, many thanks..

From this schematic I learned many things about differences between the 22
and 22s...

Now I need the component and conductor drawing of the 22s... I know that
the transmitter is being keyed, when the ptt which is depressed but there is
no audio being transmitted... I also discovered that the +duplex
and -duplex functions are not taking place... the audio turn on and the
duplex function may be originating from the same ptt function...

Does anyone know where I can get the print circuit board layout for the
conductor side and component side for the main circuit board for the icom
22s transceiver??

Larry


"Eskay" wrote in message
...
On Sun, 30 Jan 2005 09:00:39 -0500, larry wrote:

Greetings again..

I found the problem with the audio output chip, so that problem has been
solved...

Does anyone have a copy of the icom 22s.. this is the diode matrix
version.
the manual I have, ic22, has the crystal board version..

I am looking for someone who has a computer scanner who could scan the
schematic drawing and email it to me. My photo program and scanner can
handle .tif and jpg formats and possibly other but I am only familiar
with
those two..

If you can, would you scan the page and send it to me uncrushed.. I
scanned
a blank, 8.5 by 11 inch page and it took about 120k.. my isp can handle
that...

Larry ve3fxq


I now have a good copy of the schematic, will send it to you on request.
73 de Eskay..

Greetings again

Well I seem to have gotten back my transmitted audio, though it is quite
distorted... I will work on that shortly...

I have been noticing two wires which end in bar wires.. they seem to be
coming from the same ribbon cable that goes to the diode matrix board. does
anyone know where they came from and when they are supposed to go?

Larry




"larry" wrote in message
...
Greetings, again...

One of the responders, to this message, was kind enough to send me a .pdf
file of the icom 22s schematic... again, to him, many thanks..

From this schematic I learned many things about differences between the 22
and 22s...

Now I need the component and conductor drawing of the 22s... I know that
the transmitter is being keyed, when the ptt which is depressed but there
is
no audio being transmitted... I also discovered that the +duplex
and -duplex functions are not taking place... the audio turn on and the
duplex function may be originating from the same ptt function...

Does anyone know where I can get the print circuit board layout for the
conductor side and component side for the main circuit board for the icom
22s transceiver??

Larry


"Eskay" wrote in message
...
On Sun, 30 Jan 2005 09:00:39 -0500, larry wrote:

Greetings again..

I found the problem with the audio output chip, so that problem has
been
solved...

Does anyone have a copy of the icom 22s.. this is the diode matrix
version.
the manual I have, ic22, has the crystal board version..

I am looking for someone who has a computer scanner who could scan the
schematic drawing and email it to me. My photo program and scanner
can
handle .tif and jpg formats and possibly other but I am only familiar
with
those two..

If you can, would you scan the page and send it to me uncrushed.. I
scanned
a blank, 8.5 by 11 inch page and it took about 120k.. my isp can
handle
that...

Larry ve3fxq


I now have a good copy of the schematic, will send it to you on request.
73 de Eskay..