I have some pictures up of the parts and complete units.
12 different coils, 6 labeled as transformersc,50-170kc,165-560kc,530-1800kc,1.76-6.0mc,5.8-19.2mc,19-65mc.
6 labeled as transformer:ampl.50-170kc,165-560kc,530-1800kc,1.76-6.0mc,5.8-19.2mc,19-65mc. http://userweb.ncx.com/moz/osc.jpg
Interstage audio transformer,running off the 12at7 audio oscillator.
http://userweb.ncx.com/moz/int.jpg
Variable cap, marked in parts list as 442 pf, measured about 465.
http://userweb.ncx.com/moz/var.jpg
Power transformer,115/230 pri,secondary as
174v 620ma
278v 77ma
24v 1.21a
6.3v 3.2a
6.3v 3.0a
http://userweb.ncx.com/moz/pwr.jpg
Any and all parts for HP606A signal generators.The 4 on the lower left are solid state (Logimetrics AN/GRM50C 50khz-80mhz)with
nixies, 3 of them work, one has a broken power switch,$40 ea plus ship(a lot lighter than the HP's)
http://userweb.ncx.com/moz/parts.jpg
Complete units for $40 plus ship.
http://userweb.ncx.com/moz/comp.jpg





"Robert Mozeleski" wrote in message ...
I have many of these HP 606A signal generators being parted out. Also have complete ones for sale but you wouldn't want to pay
shipping on these. 50kc-65mhz. Send me an email if you need meters,knobs,tubes, transformers, whatever. Also have a few
Tektronix
535a scopes being parted out with various plug-ins.

Behold, Robert Mozeleski signalled from keyed 4-1000A filament:

I have some pictures up of the parts and complete units. 12 different
coils, 6 labeled as
transformersc,50-170kc,165-560kc,530-1800kc,1.76-6.0mc,5.8-19.2mc,19-65mc.
6 labeled as
transformer:ampl.50-170kc,165-560kc,530-1800kc,1.76-6.0mc,5.8-19.2mc,19-65mc.
http://userweb.ncx.com/moz/osc.jpg
Interstage audio transformer,running off the 12at7 audio oscillator.
http://userweb.ncx.com/moz/int.jpg
Variable cap, marked in parts list as 442 pf, measured about 465.
http://userweb.ncx.com/moz/var.jpg
Power transformer,115/230 pri,secondary as 174v 620ma 278v 77ma
24v 1.21a
6.3v 3.2a
6.3v 3.0a
http://userweb.ncx.com/moz/pwr.jpg

Hi Robert,

How much for the above shipped to Rosedale, Canada, V0X 1X0?

--
Gregg
*It's probably useful, even if it can't be SPICE'd*
http://geek.scorpiorising.ca

Robert and all colleagues in this forum,

Good afternoon.

It is with great interest that I came across this website when I was searching for HP606A Signal Generator spares.

I have three old HP Signal Generators and one of them is the HP606A.

The generator however is not functioning on some attenuator settings and after investigating I found that one of the springs in the spring assembly is broken. This broken spring is coupled to the 20db attenuator pad.

The question is now, will there be a possibility that individual springs of the spring assembly are available or only the whole spring assembly or even only the attenuator as a whole.

The spring assy stock (part) number is 355C-32.

See message quote from Robert below.

Thank you
Regards
Gerrit

Kemptonpark
South Africa


Quoted message:
"Robert Mozeleski" wrote in message ...[color=blue][i]
I have many of these HP 606A signal generators being parted out. Also have complete ones for sale but you wouldn't want to pay
shipping on these. 50kc-65mhz. Send me an email if you need meters,knobs,tubes, transformers, whatever.