************ Old Radio Knobs **************

Note: I'll take $100 for the lot... plus shipping

These are all used, most have set screws, with nothing worse than minor
scuffs and smudges and fit 1/4" shafts, unless noted.

Dakaware $25 all
1-1/16" Knurled Knob (2)
1-1/16" Knurled Knob w/ 1.5" skirt w/ white indicator line (2)
1-1/16" Knurled Knob w/ 2" skirt marked 0-10 (1)
1-5/8" Knurled Knob w/ 2-1/16" skirt & unfilled indicator line (1)
2-3/8" Knurled Knob w/ white vinyl pointer at skirt level (2)
2-3/8" Knurled Knob w/ 3" skirt & unfilled indicator line (1)
2-1/16" skirt only

Harry Davies
#1206 1-3/8" knobs 10 for $10
Short (1-3/16")pointer knob unfilled indicator line -- Not sure if
this is Davies... There are a box of these -- 3/$1

Kenwood 5cm diameter knobs that look like they are from a Kenwood
TS-830 (main tuning knob) or similar
One that's been backfilled with shot to give it some heft -- $7
The plastic spinner version -- $15

Kurz-Kasch

-- 300 series, 30+ parts, $50 for all --

#308 1-1/8" knob (5)
#385 1-3/8" knob (4)
#309 1-5/8" knob (8)
#310 2-3/8" knob w/metal spinner shaft (3)
#310 2-3/8" knob -- hub drilled out to 3/8"

#380 1-1/8" skirted knob (4)
#308 1-1/8" knob w/vinyl pointer
#308 1-1/8" knob w/ 1-3/4" black metal skirt w/ 100 graduations
over 180 degrees
#308 1-1/8" knob w/ 1-3/4" brite metal skirt w/ 100 graduations
over 360 degrees
#309 1-5/8" knob w/ metal spinner and 2-1/4" black metal dial with
100 graduations
#309? (may not be KK) 1-5/8" knob w/ plastic spinner and 2-1/4"
metal dial with 100 graduations
#311 2-1/16" skirted knob (some of the white lines are need
refilling on these) (5)


-- 600 series 10 parts, $20 for all --

These look like what was on some '60's Hammarlund, Eico & Knight
Kit stuff
#642 1.5" skirted knob (1)
#S-645 .75" skirted knob w/indicator line (1)
#647 1" skirted knob w/indicator line (3)
#653 1.5" skirted knob w/indicator line (5)


National HRT 2-1/16" diameter. Black, trim rings somewhat tarnished --
$5 ea


There are also many knobs from 1960's Tektronix and Hewlett Packard
oscilloscopes, if anyone has any need, please inquire.



All of the above plus shipping, if necessary, naturally.

Contact: Marv WC6W 310 649 3111 (reasonable hours Pacific Time
please)





*