Hi All,

Does anyone out there have such a thing. I need the RF gain control pot
with the AGC switch, but a spares unit preferably in the Seattle area
would be good. Please respond to:



Many thanks and 73,

Pete

If you find one, I could use a decent (i.e not full of the typical TCS
panel pitting corrossion lots of them have) front panel. I have an
otherwise nice low S/N (18!) TCS-13 receiver that looks like it must have
been installed for many years out in the open - badly pitted with salt spray
crud.

Anyone have any success restoring these pitted panels?

I got a suggestion on the BA list to cover the pits with black magic
marker...dont think thats going to work on mine!

Chris Bowne, AJ1G
Stonington, CT

If you find one, I could use a decent (i.e not full of the typical TCS
panel pitting corrossion lots of them have) front panel. I have an
otherwise nice low S/N (18!) TCS-13 receiver that looks like it must have
been installed for many years out in the open - badly pitted with salt spray
crud.

Anyone have any success restoring these pitted panels?

I got a suggestion on the BA list to cover the pits with black magic
marker...dont think thats going to work on mine!

Chris Bowne, AJ1G
Stonington, CT