| Home |
| Search |
| Today's Posts |
|
#1
December 1st 05, 10:23 PM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
need Yaseu FT101 elmer
Hi,
Receiver works okay. However, when I set the FT101 to TUNE and switch mike to MOX per tuning procedure, I get no final current. Also in CW mode there is not switching to transmit. Help!!! Thanks in advance, The Eternal Squire |
|
#2
December 10th 05, 12:37 AM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
|
need Yaseu FT101 elmer
Did you flip the filament switch on?
The CW will work only if the vox system is functional. IF you still have trouble contact me via my e-mail at w4nti@NOSPAM mindspring. com Then when the SPAM catcher gets you, do what it says. Dan/W4NTI wrote in message oups.com... Hi, Receiver works okay. However, when I set the FT101 to TUNE and switch mike to MOX per tuning procedure, I get no final current. Also in CW mode there is not switching to transmit. Help!!! Thanks in advance, The Eternal Squire |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Announcing the 'new' YASEU VX-5R Radio eGroup on YAHOO ! | Shortwave | |||
| WTD: YASEU G-800SDX ROTOR CONTROL | Swap | |||
| WTB: Yaseu FT-650 | Swap | |||
| WTB: Yaseu FT-650 | Swap | |||
| YASEU FT-980 For Sale on ebay | Swap | |||
Linear Mode
