Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hi, Does anyone know What Double Super Hetrodyne does in a CB radio.
I have a GE 40 channel cb and it has Double Super Hetrodyne. Brian - Las Vegas |
#2
![]() |
|||
|
|||
![]()
Brian,
Without going into the technical aspects, I'll simply say that a double-conversion superheterodyne receiver offers improved sensitivity and selectivity over a single-conversion superhet. In the early days of CB (ie, the 1960s), the majority of CB sets used a single-conversion receiver, while some of the high- end models used double-conversion. As CB became more populer in the late 1960s and more stations came on the air, it became necessary to improve receiver selectivity to reduce the problem of "bleedover" from adjacent channels. With that in mind, the majority of CB manufacturers began using double superhets for even their "cheap" radios, and from then on it became standard practice. If you would like to learn about the technical reasons for all of this, pay a visit to your public library and look for an ARRL Radio Amateur's Handbook, and read up on receiver theory and design. 73, Dean K5DH In article , says... Hi, Does anyone know What Double Super Hetrodyne does in a CB radio. I have a GE 40 channel cb and it has Double Super Hetrodyne. Brian - Las Vegas |
#3
![]() |
|||
|
|||
![]()
Since citizens band is operating at about 27 MHz, the standard i.f. of .455
MHz allows an image of twice the i.f. frequency (.91 MHz). This image is not rejected by the tuned circuits of the cb rig. So, double conversion is used. In this specific case, the selectivity is not increased, but the image rejection is. Often the first i.f. is in the 5 to 10 MHz range. Recently, with the use of low noise mixers, the first i.f. can be at 40 MHz or higher, which provides excellent image rejection. Bottom line is that most cb radios that are average or better use double conversion. In the case of your GE unit, the marketing department decided to add a little hype to an rather ordinary cb unit and called it a Double Super Hetrodyne. Is your radio a special radio? No. Is it worth more? No. Colin K7FM |
#4
![]() |
|||
|
|||
![]()
the first if is on 10.7 , and use commercial ceramic filters auns the second
one is on 455 khz and also use ceramic filters !!! a simply question of cost.... f4ere serge. "Captain Crane" a écrit dans le message de news: ... Hi, Does anyone know What Double Super Hetrodyne does in a CB radio. I have a GE 40 channel cb and it has Double Super Hetrodyne. Brian - Las Vegas |
#5
![]() |
|||
|
|||
![]() "Captain Crane" wrote in message ... Hi, Does anyone know What Double Super Hetrodyne does in a CB radio. I have a GE 40 channel cb and it has Double Super Hetrodyne. Brian - Las Vegas The straight answer? Double conversion is used to reduce images. It does nothing for sensitivity or selectivity in itself; and it probably decreases dynamic range and makes the receiver more prone to spurious responses. Pete |
#6
![]() |
|||
|
|||
![]()
Captain Crane
wrote in message ... Hi, Does anyone know What Double Super Hetrodyne does in a CB radio. I have a GE 40 channel cb and it has Double Super Hetrodyne. Brian - Las Vegas My question is what the heck does this have to do with AMATEUR BOATANCHORS? There are dozens of CB newsgroups out there, maybe hundreds, of course no one there could have answered this question... But still. I know, now someone is going to say I'm being rude to new comers... Ron |
#7
![]() |
|||
|
|||
![]()
On Wed, 01 Feb 2006 23:37:19 GMT, " Ron in Radio Heaven"
wrote: Captain Crane wrote in message ... Hi, Does anyone know What Double Super Hetrodyne does in a CB radio. I have a GE 40 channel cb and it has Double Super Hetrodyne. Brian - Las Vegas My question is what the heck does this have to do with AMATEUR BOATANCHORS? There are dozens of CB newsgroups out there, maybe hundreds, of course no one there could have answered this question Maybe that's why he asked here. Or then again, a radio is a radio. And probably some folks here maybe even learned something too. 73 Gary K4FMX .. But still. I know, now someone is going to say I'm being rude to new comers... Ron |
#9
![]() |
|||
|
|||
![]()
Dr. Anton T. Squeegee wrote:
There is a possibility -- a very weak one -- that this bizarre market-speak means that the radio was designed with a double-conversion receiver. It's impossible to say without seeing a schematic. Why anyone would put that much effort and expense into a CB radio, however, is beyond me. I think you're running into nothing more that marketing buzzwords. "Double Super Heterodyne" certainly has no meaning in the technical world. I think it means something equivalent to "has ears and barks well into the next county bubba 10-4 beep". Okay, that was a nasty shot but there were indeed double-conversion rigs back in the CB heyday. When every other trailer in the court was running kilos of Bird-watts double talk conversion had its advantages. We're 10-8 and on the side bubba 10-4? beep. Gotcha comin on. Beep. I really don't know this lingo...I'm reading it off the side of a 1970s beer mug....a cheap mug at that. -Bill |
#10
![]() |
|||
|
|||
![]() "- exray -" wrote in message ... Dr. Anton T. Squeegee wrote: I think it means something equivalent to "has ears and barks well into the next county bubba 10-4 beep". Okay, that was a nasty shot but there were indeed double-conversion rigs back in the CB heyday. When every other trailer in the court was running kilos of Bird-watts double talk conversion had its advantages. We're 10-8 and on the side bubba 10-4? beep. Gotcha comin on. Beep. I really don't know this lingo...I'm reading it off the side of a 1970s beer mug....a cheap mug at that. -Bill I assumed it meant double-conversion. Pete |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
203 English-language HF Broadcasts audible in NE US (27-NOV-04) | Shortwave | |||
shortwv | Shortwave | |||
Amateur Radio Newslineâ„¢ Report 1402 Â June 25, 2004 | Shortwave | |||
Amateur Radio Newslineâ„¢ Report 1402 Â June 25, 2004 | General | |||
GE Superadios for Dummies [ GE Super Radios I - II - III ] | Shortwave |