Just got this off ebay and am wondering how I should connect it to my
Lafayette HE-10? It has the power plug, of course, and it has a coax
on the back. Do I hook this up to the antenna leads? Bama just has
the schematic on the site but not the manual. Any help would be
appreciated.
Thank you
--
"What do you mean there's no movie?"

wrote in message
news:qon2qBoLzSnd-pn2-dnYtBYh1pZBW@localhost...
Just got this off ebay and am wondering how I should connect it to my
Lafayette HE-10? It has the power plug, of course, and it has a coax
on the back. Do I hook this up to the antenna leads? Bama just has
the schematic on the site but not the manual. Any help would be
appreciated.
Thank you
--
"What do you mean there's no movie?"

First, it doesn't hook up to the antenna leads!

The outer cover of the coax goes to ground (naturally). The
center of the coax goes to either the plate of the mixer tube or
the plate side of the IF transformer. Looking at the HE-10 schematic
at the 'Bama site, the mixer tube is a 6BE6 and the plate is pin 5.
Either connect there or find the pin on the IF transformer that it
eventually goes to. Heath provided a template and RCA socket with
the kit for installation. You may want to add such a socket.

If you give me a mailing address, I can send you a (not terribly great
quality)
photocopy of the HD-11 manual.

Regards,
John

Antenna??
It hooks into the IF of the receiver.
...Dave
wrote in message
news:qon2qBoLzSnd-pn2-dnYtBYh1pZBW@localhost...
Just got this off ebay and am wondering how I should connect it to my
Lafayette HE-10? It has the power plug, of course, and it has a coax
on the back. Do I hook this up to the antenna leads? Bama just has
the schematic on the site but not the manual. Any help would be
appreciated.
Thank you
--
"What do you mean there's no movie?"

On Wed, 26 Apr 2006 14:21:24 UTC, "John Sheatsley"
wrote:


wrote in message
news:qon2qBoLzSnd-pn2-dnYtBYh1pZBW@localhost...
Just got this off ebay and am wondering how I should connect it to my
Lafayette HE-10? It has the power plug, of course, and it has a coax
on the back. Do I hook this up to the antenna leads? Bama just has
the schematic on the site but not the manual. Any help would be
appreciated.
Thank you
--
"What do you mean there's no movie?"

First, it doesn't hook up to the antenna leads!

The outer cover of the coax goes to ground (naturally). The
center of the coax goes to either the plate of the mixer tube or
the plate side of the IF transformer. Looking at the HE-10 schematic
at the 'Bama site, the mixer tube is a 6BE6 and the plate is pin 5.
Either connect there or find the pin on the IF transformer that it
eventually goes to. Heath provided a template and RCA socket with
the kit for installation. You may want to add such a socket.

If you give me a mailing address, I can send you a (not terribly great
quality)
photocopy of the HD-11 manual.

Regards,
John
Thank you John, the address is: sctvguy1 at adelphia.net
I have never had one of these before and the wire is just bare, the
guy must have had it soldered in or something.


--
"What do you mean there's no movie?"

On 4/26/06 2:33 PM, in article qon2qBoLzSnd-pn2-TW848dfB2QVM@localhost,
" wrote:

On Wed, 26 Apr 2006 14:21:24 UTC, "John Sheatsley"
wrote:


wrote in message
news:qon2qBoLzSnd-pn2-dnYtBYh1pZBW@localhost...
Just got this off ebay and am wondering how I should connect it to my
Lafayette HE-10? It has the power plug, of course, and it has a coax
on the back. Do I hook this up to the antenna leads? Bama just has
the schematic on the site but not the manual. Any help would be
appreciated.
Thank you
--
"What do you mean there's no movie?"

First, it doesn't hook up to the antenna leads!

The outer cover of the coax goes to ground (naturally). The
center of the coax goes to either the plate of the mixer tube or
the plate side of the IF transformer. Looking at the HE-10 schematic
at the 'Bama site, the mixer tube is a 6BE6 and the plate is pin 5.
Either connect there or find the pin on the IF transformer that it
eventually goes to. Heath provided a template and RCA socket with
the kit for installation. You may want to add such a socket.

If you give me a mailing address, I can send you a (not terribly great
quality)
photocopy of the HD-11 manual.

Regards,
John
Thank you John, the address is: sctvguy1 at adelphia.net
I have never had one of these before and the wire is just bare, the
guy must have had it soldered in or something.

Be sure there is a capacitor at one or both ends.

Don