On Feb 15, 2:53 pm, "Telstar Electronics"
wrote:
The VoiceMax prototype field testing continues. There are no issues at
this time.
Several people have emailed me asking questions. Here are some of
those answers:
Currently installed in a Cobra19 DX4 with stock mic.
The VoiceMax module has been set on the prototype at a fixed 15:1
compression ratio.
The Cobra19's limiter pot has been adjusted so that the radio will
maintain a 95% modulation envelope from a whisper... to yelling into
the mic. (statement based on 2" distance from mic)
The "noise gate" has been adjusted to block all sounds below an input
level of 1mV from mic. At this level... and with the stock Cobra
mic... it blocks all tire noise in my vehicle.
Output of module has been adjusted to match the output of the stock
mic. (about 40mV @ 1KHz tone)
The power source for the module is derived from inside the radio and
is fully regulated. The current draw is around 15mA.
Attack time of the modules limiter is about 1mS. Decay time has been
designed to around 500mS.

I plan on starting an FAQ page out at the Telstar Electronics web site
based on these... and other questions I receive.

Please go tohttp://www.telstar-electronics.com/default_files/VoiceMax.htm
to see the latest details as they become available.

Garbage!

On Feb 19, 2:44 pm, "Telstar Electronics"
wrote:
The second prototype unit has been put into mobile operation. We have
also set up an FAQ regarding this new product athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...

GARBAGE

On Feb 26, 6:46 am, "Telstar Electronics"
wrote:
I'm attempting to finalize the feature list for the new VoiceMax
module. I'm torn between having an adjustment for the compression
ratio or having a fixed value. What are your feelings? Is an
adjustment pot for compression a "must"? Thanks for your input.

http://www.telstar-electronics.com/d...ductDevelopmen...

garbage

On Feb 28, 2:55 pm, "Telstar Electronics"
wrote:
The VoiceMax project is progressing on schedule and a product release
date has been set. This date has been set on the conservative side and
the product could conceivably be released sooner. I invite all of you
to keep abreast of the continuing progress with this product athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...

Garbage

On Mar 6, 2:17 pm, "Telstar Electronics"
wrote:
On Mar 1, 3:39 pm, "Telstar Electronics"
wrote:

On Mar 1, 7:26 am, james wrote:

I am waiting with such great anticipation that I can't hardly control
myself.

I'm sorry to hear that your incontinence problem still plagues you
from time to time...

www.telstar-electronics.com

Well... while James mulls that over... the PCB development continues.
The board is about 50% complete at this time. I expect to be done by
this weekend... and have the first custom boards within two weeks. I
will post a pic or two on the net as soon as I have a few built up.

Follow the development of the VoiceMax Speech Processor athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...

garbage

The first pre-production pcb has been built and put into service.
Pictures of this board are now available at
http://www.telstar-electronics.com/d...evelopment.htm
Several other additional boards will be built and put in service
within the next two weeks. After this pre-production pilot... final
adjustments will be made to the pcb to allow for easier/better
manufacturing before the final pcb is released.

P.S. I may be looking for several radio techs in the next few months
that would agree to do some beta testing. Email me with your
qualifications to be considered. The beta units will be free of
charge... and I would only expect a detailed performance report in
return.


www.telstar-electronics.com

Why do you sell a rf amplifier that covers "26-30MHz Coverage"
It sounds like you are selling a CB amp which I thought was illegal.
Just curious, Thanks

We have no control how our amplifiers are used. They are primarily
designed for medical, acousto-optic, and laser applications like are
shown at http://www.neostech.com/PDFs/drivers%20for%2025WQs.htm

Thanks for your question.

www.telstar-electronics.com

Thanks for your continued interest in the VoiceMax speech processor.
See the latest information regarding this product at
http://www.telstar-electronics.com/d...evelopment.htm

On Mar 29, 1:34 pm, "Telstar Electronics"
wrote:
Thanks for your continued interest in the VoiceMax speech processor.
See the latest information regarding this product athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...

garbage

On Mar 27, 5:53 am, "Telstar Electronics"
wrote:
The first pre-production pcb has been built and put into service.
Pictures of this board are now available athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...
Several other additional boards will be built and put in service
within the next two weeks. After this pre-production pilot... final
adjustments will be made to the pcb to allow for easier/better
manufacturing before the final pcb is released.

P.S. I may be looking for several radio techs in the next few months
that would agree to do some beta testing. Email me with your
qualifications to be considered. The beta units will be free of
charge... and I would only expect a detailed performance report in
return.

www.telstar-electronics.com

garbage