Home |
Search |
Today's Posts |
#19
![]() |
|||
|
|||
![]()
Scott Schrader wrote in news:3F4E39DD.A59629F7
@visi.com: try alcohol first for solvent, it should not mangle coil forms. if that doesn't work, a paintbrush with a little bit of acetone is the next step for solvent. What I did for those stubborn slugs was to heat them with the tip of my weller. The heat will soften the paint/sealant and not damage the coil form. r Irv Finkleman wrote: K5DH wrote: I am restoring an old Kris 23+ tube-type CB radio. As with most Japanese-made CB gear from that era, the coil slugs are held in place with some sort of glossy white paint-like sealer. How do I dissolve that sealer without damaging the coil forms? I'm unable to budge the slugs with a diddle stick, and I don't want to risk fracturing a slug by trying to force them. 73, Dean K5DH Usually a drop of solvent will loosen them. If the coil forms are plastic it might be a problem, but you can test the solvent on the end of the form first. -- -------------------------------------- Diagnosed Type II Diabetes March 5 2001 Beating it with diet and exercise! 297/215/210 (to be revised lower) 58"/43"(!)/44" (already lower too!) -------------------------------------- Visit my HomePage at http://members.shaw.ca/finkirv/ Visit my very special website at http://members.shaw.ca/finkirv4/ Visit my CFSRS/CFIOG ONLINE OLDTIMERS website at http://members.shaw.ca/finkirv5/ -------------------- Irv Finkleman, Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP Calgary, Alberta, Canada -- If it's a "new economy," why do they want my obsolete old money? -- "Any sufficiently advanced technology is indistinguishable from magic." Arthur C. Clarke (1917 - ), "Technology and the Future" |
Thread Tools | Search this Thread |
Display Modes | |
|
|