"Robert The Bruce" wrote in message
...
"Dr. Death" wrote:
"Reg1647" wrote in message
...
The variable pot on the 667, what size is it? I put a 1 megohm in it
but
dont
seem to to doing right. Thanks for your help

the pot used on a 350hdv is a 250ohm 2 watt I don't have a 667 schemati
c.
but knowing how they build their linears they design there equipment to

utilize the same switches and so forth for convenience and cost
considerations. The pot on a 667 is used to control the driver pill, so

it
goes to stand that it most probably is the same size. The following lin
ks
have the 350 schematic
http://www.texasstar.com/350HDVschematic.gif
http://www.geocities.com/linearschem...texasstar.html
--
visit http://www.geocities.com/linearschematics/


Hey you know linears are illegal on CB

What does that matter to you George, you've promoted
illegal cb for years. Now talk about a hypocrite.

Landshark

A quote from George:

"David, I can only assume you are talking about THE BASE VERSION, it RUNS 21
VOLTS TO THE PILLS WHEN IT IS IDLE, WHEN YOU KEY UP THE VOLTAGE WILL DROP
PROBABLY TO 16 VOLTS OR SO, the pills aren't seeing 21 volts. That IS
CALLED AN UNREGULATED POWER SUPPLY Now I don't agree with the builder of X
Force regarding regulating, but because he is not a technician by any
stretch of the means I know he doesn't understand the correct operation of
the amps he is building. he is just a parts assembler. But It is cheaper to
build an amp with a UN regulated power supply"



--
Real heroes are men who fall and fail
and are flawed, but win out in the end
because they've stayed true to their
ideals and beliefs and commitments.

"Poppa Roach" wrote in message
...

A quote from George:

"David, I can only assume you are talking about THE BASE VERSION, it
RUNS 21 VOLTS TO THE PILLS WHEN IT IS IDLE, WHEN YOU KEY UP THE
VOLTAGE WILL DROP PROBABLY TO 16 VOLTS OR SO, the pills aren't seeing
21 volts. That IS CALLED AN UNREGULATED POWER SUPPLY Now I don't
agree with the builder of X Force regarding regulating, but because
he is not a technician by any stretch of the means I know he doesn't
understand the correct operation of the amps he is building. he is
just a parts assembler. But It is cheaper to build an amp with a UN
regulated power supply"


How is that promoting illegal CB, just stating a fact by answering a
technical question, The question was in regard to power supplies, you
assclown, keep diggin landquerr keep diggin.

Oh there's much more out there George Busch wa3moj
email addy of Start searching the tens
of thousands of posts and thousands of nics to make sure that
you can delete them all.
That is why you started x-no archiving isn't? cover
you're troll tracks.

Landshark