Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Howdy, what the best mobile radio for eliminating ignition noise through the
antenna? Texas Ranger's ??? Thanks... |
#2
![]() |
|||
|
|||
![]()
No such thing.....Noise through the antenna has to be eliminated at the source
Buck |
#3
![]() |
|||
|
|||
![]()
Sorry, Buck
There are noise quieting devices in radios that can be fairly efficient at eliminating short duration pulses such as ignition noise. I'm just not familiar with the various radios and their capabilities in this department. Best regards from Rochester, NY Jim "Bjmlittle00" wrote in message ... No such thing.....Noise through the antenna has to be eliminated at the source Buck --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.668 / Virus Database: 430 - Release Date: 4/24/04 |
#4
![]() |
|||
|
|||
![]()
Just turn up your squelch dumbass.
In article . net, Bill Seas says... Howdy, what the best mobile radio for eliminating ignition noise through the antenna? Texas Ranger's ??? Thanks... |
#5
![]() |
|||
|
|||
![]() "Bill Seas" wrote in message ink.net... Howdy, what the best mobile radio for eliminating ignition noise through the antenna? Texas Ranger's ??? Thanks... The one with the power switch set to off. But seriously, most radios made now days have very ineffective noise blankers and are very susceptible to engine/fuel pump noise. You would be ahead of the game to look for notes issued by the manufacturer of your vehicle concerning RF noise. There really is a lot of information to be gained here that a lot of folks tend to overlook. |
#6
![]() |
|||
|
|||
![]()
"AKC KennelMaster" wrote in message
... "Bill Seas" wrote in message ink.net... Howdy, what the best mobile radio for eliminating ignition noise through the antenna? Texas Ranger's ??? Thanks... The one with the power switch set to off. But seriously, most radios made now days have very ineffective noise blankers and are very susceptible to engine/fuel pump noise. You would be ahead of the game to look for notes issued by the manufacturer of your vehicle concerning RF noise. There really is a lot of information to be gained here that a lot of folks tend to overlook. Thanks bjmlittle00, Jim and AKC KennelMaste; I appreciate the feedback... |
#7
![]() |
|||
|
|||
![]()
"Bill Seas" wrote in message
ink.net... Howdy, what the best mobile radio for eliminating ignition noise through the antenna? Texas Ranger's ??? Thanks... From what I've read, the Magnum 257 has one of the quietest receivers when it comes to ignition noise. It needs to be modified to work on CB, but it's a very easy mod. I had one a while ago, but got rid of it because of a new car. Someone mentioned in the other replies about eliminating noise, not covering it up, but some of us just aren't that inclined to start hooking up ground wires all over the undercarriage and engine compartment of our vehicles. -- 73! de Andy 2LD751 http://2ld751.tripod.com AOL IM: AndyLD751 Support the "Alternate" Calling Freq 26.285 USB |
#8
![]() |
|||
|
|||
![]()
26.285 has always been a nice place to hang out because idiots like yourself
didnt broadcast it or post it to everybody. 73! de Andy 2LD751 http://2ld751.tripod.com AOL IM: AndyLD751 Support the "Alternate" Calling Freq 26.285 USB |
#9
![]() |
|||
|
|||
![]() MrTimNebo wrote: 26.285 has always been a nice place to hang out because idiots like yourself didnt broadcast it or post it to everybody. 73! de Andy 2LD751 http://2ld751.tripod.com AOL IM: AndyLD751 Support the "Alternate" Calling Freq 26.285 USB used to use .315 as a home freq. you are right tim its very quiet there and i guess its a result of people tuning their ant's for the nickel. heard some people in the past on 25 mhz but never bothered. |
#10
![]() |
|||
|
|||
![]()
Noise can get into the radio through the power wiring as well as the
antenna. Power directly from the battery is best but also keep your ground wire as short as possible. It sometimes helps to ground the chassis also, especially with magnetic mount antennas. Chris "Bjmlittle00" wrote in message ... No such thing.....Noise through the antenna has to be eliminated at the source Buck |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|