I just purchased this radio, and have not hooked it up yet. My wife is
off in the car at the moment. I figured now would be a good time to
ask a few questions.

Dynamike - Delta Tune and RF Gain- I read the manual, and understand
it, but is there any better setting for each of these? What should I
do and not do to these controls. Just wondering which controls are
more sensitive to not hearing TX from others if their set to high, and
vice versa....which ones set to high or low will cause my TX not to be
heard, stuff like that. Hope someone can help.

On Wed, 06 Oct 2004 16:39:07 -0400, Alex
wrote in :

I just purchased this radio, and have not hooked it up yet. My wife is
off in the car at the moment. I figured now would be a good time to
ask a few questions.

Dynamike


That's a microphone gain control. If someone says you are too loud or
your audio is crappy, turn it down.


- Delta Tune


That's for tuning in people who have had mods done to their radios and
can no longer tune the exact channel frequency. It also helps for
people who still use old crystal rigs because crystal frequencies tend
to drift over time.


and RF Gain-


Turn it up to bring in weak stations. Turn it down to cut down on
background noise.


I read the manual, and understand
it, but is there any better setting for each of these? What should I
do and not do to these controls. Just wondering which controls are
more sensitive to not hearing TX from others if their set to high, and
vice versa....which ones set to high or low will cause my TX not to be
heard, stuff like that. Hope someone can help.


Just play with them until you get the hang of it.