Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
"Bill Lowry" wrote in message
news:AK8nd.13040$pP5.8680@trnddc05... When I read your response I said, "Oh no". I was thinking that I had mad an expensive mistake. However, it is an ESP2. I am glad it was just a typing mistake instead a purchase mistake. (g) I soldered a diode into the B position and started twisting the dial. Every time I started from, say channel 1, the next time I rotated the dial to channel 1 again I was still on the normal channel 1. Got any Ideas? Bill "DR. Death" wrote in message ... "Bill Lowry" wrote in message news:b2dmd.3442$J55.1562@trnddc06... Has anyone performed the Frequency Mod as outlined on the CBTricks web site. I performed the mod as shown there but I can twist the Channel knob until I wear it out and it still only works on the Normal channels. I hate to get beat when all that has to be done is to add one diode. (g) Bill http://www.cbtricks.com/ .........and go to radio info..........Midland............77-255ESP You listed your model as 77-255ESP, cbtricks mod is for the 77-255ESP2 model. Another thought, test the diode, maybe it's bad or was damaged on install. |
#12
![]() |
|||
|
|||
![]()
I did test the diode as well as compare it with another diode of the same
type. "DR. Death" wrote in message ... "Bill Lowry" wrote in message news:AK8nd.13040$pP5.8680@trnddc05... When I read your response I said, "Oh no". I was thinking that I had mad an expensive mistake. However, it is an ESP2. I am glad it was just a typing mistake instead a purchase mistake. (g) I soldered a diode into the B position and started twisting the dial. Every time I started from, say channel 1, the next time I rotated the dial to channel 1 again I was still on the normal channel 1. Got any Ideas? Bill "DR. Death" wrote in message ... "Bill Lowry" wrote in message news:b2dmd.3442$J55.1562@trnddc06... Has anyone performed the Frequency Mod as outlined on the CBTricks web site. I performed the mod as shown there but I can twist the Channel knob until I wear it out and it still only works on the Normal channels. I hate to get beat when all that has to be done is to add one diode. (g) Bill http://www.cbtricks.com/ .........and go to radio info..........Midland............77-255ESP You listed your model as 77-255ESP, cbtricks mod is for the 77-255ESP2 model. Another thought, test the diode, maybe it's bad or was damaged on install. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Help measuring freq of 2m rig? | Equipment | |||
Help measuring freq of 2m rig? | Equipment | |||
Help measuring freq of 2m rig? | Equipment | |||
AD9850 DDS - Help prevent suicide | Homebrew | |||
AD9850 DDS - Help prevent suicide | Homebrew |