Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
Old April 22nd 05, 06:41 AM
CB outlaw
 
Posts: n/a
Default

I'd like to know if they can be easily modified to work the on CB
channels and above and below. If they can be modifible, I'll definitly
get one (or 2 or three or four or more)

  #12   Report Post  
Old April 22nd 05, 02:33 PM
KAXN-9546
 
Posts: n/a
Default

On 21 Apr 2005 21:41:58 -0700, "CB outlaw"
wrote:

I'd like to know if they can be easily modified to work the on CB
channels and above and below. If they can be modifible, I'll definitly
get one (or 2 or three or four or more)



Write to the FCC at

Federal Communications Commission
EB, ARS
1270 Fairfield Road
Gettysburg, PA 17325

Make sure to include your full name and address, they'll get back to
you about getting that radio modified.


Raymond Sirois
SysOp: The Lost Chord BBS
607-733-5745
telnet://thelostchord.dns2go.com:6000
  #13   Report Post  
Old April 23rd 05, 03:26 AM
CB outlaw
 
Posts: n/a
Default

OK thanx I'll do just that!!!!!!!!!!!!!!!!!!!!!!!!

  #14   Report Post  
Old April 23rd 05, 03:37 AM
CB outlaw
 
Posts: n/a
Default

BTW What does the FCC do anyways, can somebody tell me what it is that
they do? In full detail would be appreciated, tnx.

  #15   Report Post  
Old April 23rd 05, 04:06 AM
John Smith
 
Posts: n/a
Default

SHHHHH! They are listening for Osama Bin Ladin....

Regards,
John

"CB outlaw" wrote in message
oups.com...
BTW What does the FCC do anyways, can somebody tell me what it is that
they do? In full detail would be appreciated, tnx.





  #16   Report Post  
Old April 23rd 05, 10:42 PM
jim
 
Posts: n/a
Default

Steveo wrote:
Vinnie S. wrote:

On Thu, 21 Apr 2005 11:25:54 -0500, "Kevin, WB5RUE"
wrote:


No they don't. They also don't have echo and "feedback effects."

I very surprised that the FCC allows them to be type accepted. Yes I
know that ham equipment doesn't have to be type accepted to be used on
ham bands but it DOES need to be type accepted to be commercially sold.

Kevin, WB5RUE


I hate echo. I simple roger beep doesn't bother me.

Vinnie S.


They both suck used cock.

as opposed to unused cock?
  #17   Report Post  
Old April 24th 05, 02:56 PM
Professor
 
Posts: n/a
Default

The Chinese might assemble them... but they are engineered here in
Chicago.

Professor
www.telstar-electronics.com

  #18   Report Post  
Old April 25th 05, 06:37 PM
Kevin, WB5RUE
 
Posts: n/a
Default


"Professor" wrote in message
oups.com...
The Chinese might assemble them... but they are engineered here in
Chicago.

Professor
www.telstar-electronics.com



You can thank labor unions for that...and most other "Made in China"
products.

Kevin, WB5RUE



----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
  #19   Report Post  
Old April 25th 05, 06:47 PM
Vinnie S.
 
Posts: n/a
Default

On Mon, 25 Apr 2005 11:37:43 -0500, "Kevin, WB5RUE" wrote:


You can thank labor unions for that...and most other "Made in China"
products.

Kevin, WB5RUE



I have to agree. I think the idea of unions was to protect abused workers from
low pay and long ours. Since the beginning, the pendulum has swung way in favor
of unions. The biggest thing I see is plants closing down in urban areas, and
moving to cheaper rural areas. And then from there, just overseas. I would wish
they would find a middle ground, where they can both be happy. I am not against
unions, but I have seen some friends lose lifetime jobs in plants, where they
where making $25 per hour, and the plant closed and moved to NC, and hired
workers at $8-10. Now, they can't find any work for unless it's $10-15.

Vinnie S.
  #20   Report Post  
Old April 26th 05, 08:19 PM
Kevin, WB5RUE
 
Posts: n/a
Default


"Vinnie S." wrote in message
...
On Mon, 25 Apr 2005 11:37:43 -0500, "Kevin, WB5RUE"

wrote:


You can thank labor unions for that...and most other "Made in China"
products.

Kevin, WB5RUE



I have to agree. I think the idea of unions was to protect abused workers

from
low pay and long ours. Since the beginning, the pendulum has swung way in

favor
of unions. The biggest thing I see is plants closing down in urban areas,

and
moving to cheaper rural areas. And then from there, just overseas. I would

wish
they would find a middle ground, where they can both be happy. I am not

against
unions, but I have seen some friends lose lifetime jobs in plants, where

they
where making $25 per hour, and the plant closed and moved to NC, and hired
workers at $8-10. Now, they can't find any work for unless it's $10-15.

Vinnie S.


$10/hour is MUCH better than 0$/hour!

Kevin, WB5RUE



----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Amateur Radio Newsline™ Report 1402 ­ June 25, 2004 Radionews Shortwave 0 June 25th 04 08:32 PM
Amateur Radio Newsline™ Report 1402 ­ June 25, 2004 Radionews General 0 June 25th 04 08:29 PM
Amateur Radio Newsline™ Report 1398 ­ May 28, 2004 Radionews Shortwave 0 May 28th 04 09:02 PM
Amateur Radio Newsline™ Report 1380 – January 23, 2004 Radionews Shortwave 0 January 30th 04 10:57 AM
Amateur Radio Newsline™ Report 1379 – January 16, 2004 Radionews Policy 0 January 18th 04 10:35 PM


All times are GMT +1. The time now is 10:01 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017