Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Do you know same links about Colt Excalibur modification?
I would like to increase the number of channel, from 40 to 80 or 120 or more or connect a external vfo. Thanks |
#2
![]() |
|||
|
|||
![]()
All I found was this info...
(EPT360010Z Board) Modulation: VR14 or Remove R249 AM Power: VR13 SSB Power:VR12 (PTBM121D4X Board) Modulation: RV14 AM Power: RV13 SSB Power: RV12 RV4 www.telstar-electronics.com |
#3
![]() |
|||
|
|||
![]() "Telstar Electronics" ha scritto nel messaggio oups.com... All I found was this info... (EPT360010Z Board) Modulation: VR14 or Remove R249 AM Power: VR13 SSB Power:VR12 (PTBM121D4X Board) Modulation: RV14 AM Power: RV13 SSB Power: RV12 RV4 www.telstar-electronics.com Thank you !! Nothing about increase operation band ? Increase number of channels ? |
#4
![]() |
|||
|
|||
![]()
"FINPEN" wrote in message
... "Telstar Electronics" ha scritto nel messaggio oups.com... All I found was this info... (EPT360010Z Board) Modulation: VR14 or Remove R249 AM Power: VR13 SSB Power:VR12 (PTBM121D4X Board) Modulation: RV14 AM Power: RV13 SSB Power: RV12 RV4 www.telstar-electronics.com Thank you !! Nothing about increase operation band ? Increase number of channels ? Which PLL does it have? You also might be able to do a x-tal swap. |
#5
![]() |
|||
|
|||
![]() "Dr.Death" ha scritto nel messaggio Which PLL does it have? You also might be able to do a x-tal swap. I have not see into radio in this moment, but i find this link: http://www.radiomods.co.nz/integrate...s/plllist.html PLL02A PTBM048A0X COLT 1200 EXCALIBUR |
#6
![]() |
|||
|
|||
![]() "FINPEN" ha scritto nel messaggio ... "Dr.Death" ha scritto nel messaggio Which PLL does it have? You also might be able to do a x-tal swap. I have not see into radio in this moment, but i find this link: http://www.radiomods.co.nz/integrate...s/plllist.html PLL02A PTBM048A0X COLT 1200 EXCALIBUR and this link: http://www.smlec.com/cb/pllpinout.htm#PLL02A scroll list and you can see: PLL02A (NPC) MC145109 (Motorola) AN/MN6040 (Panasonic) SM5109 (NPC) TC9100P (Toshiba) ECG1233 (Sylvania) Vdd 1 16 Vss Fin 2 15 P0 RI 3 14 P1 FS* 4 13 P2 PD 5 12 P3 LD** 6 11 P4 P8 7 10 P5 P7 8 9 P6 *1 = 10 KHz steps, 0 = 5 KHz steps **1 = Locked, 0 = Unlocked The most popular chip ever made. Still in worldwide use today. Chip is found in the Cybernet chassis. A member of the Motorola family, it uses straight binary programming with internal pull-down resistors and a negative-going PD output. Modification for additional channels is a simple matter of changing the programming or the loop mixing crystal(s). The chip is widely used in the 18-channel Australian rigs, where the only real difference is in the Channel Selector switch. |
#7
![]() |
|||
|
|||
![]()
"FINPEN" wrote in message
... "Dr.Death" ha scritto nel messaggio Which PLL does it have? You also might be able to do a x-tal swap. I have not see into radio in this moment, but i find this link: http://www.radiomods.co.nz/integrate...s/plllist.html PLL02A PTBM048A0X COLT 1200 EXCALIBUR Try this site: http://members.tripod.com/~malzev/comp/pll02a.htm there are other sites that give mods for this pll. I think on my midland, grounding pin 10 gives upper channels, and tying pin 9 to pin 10 will give lower channels. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
[fa] [ebay] Colt excalibur silver eagle mic MORE | Swap | |||
Colt excalibur silver eagle mic MORE | CB | |||
[ebay][fa] Colt excalibur silver eagle mic MORE | CB | |||
COLT EXCALIBUR SSB MIC WIRE | CB | |||
[Technical question] Colt 480 needs repair | CB |