Hi,

If ICOM ever produced one of the subject items to go with the
ICOM R-71A receiver or some similar equipment, I would appreciate
knowing the model number so that I may find out the RF input
requirements.

I am trying to ascertain the specified output level from the
'scope' socket (70.4515MHz) of one of these receivers but neither
the workshop or operator's manual mentions it. Measurements show
that it is quite low, just as an inspection of the schematic
might suggest, but there is still a nagging doubt that the
receiver is not quite up to specification as the antenna to scope
socket loss is around 30dB.


IA - Joe