Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I'm passing this info along because I thought it was important for the group
(and before someone damages the radio they worked so hard for). The below email was a response from an ICOM tech after an amateur op inquired about the performance of the 746 and 746 Pro on 60 meters. Take the info for what its worth. 73 de Paul Good Morning.... Thanks for your e-mail. The 746 final PA band pass filters were never designed to support operation outside of the amateur radio bands. They will "stretch" to accept normal operation in the MARS and CAP frequencies just above and just below the amateur radio spectrum, but they will not support operation down in the 5 MHz area. They will heat up and you will damage the radio. About the only two radios will have reasonable operation on the 5 MHz area are the 706MkIIG and the 718. Best Regards; Mike Hilton Technical Support Representative ICOM America, Inc. 2380 116th Ave. NE Bellevue, WA 98004 Ph. (425) 454-7619 Fax (425) 637-8417 www.icomamerica.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Use 6-meter extension on Icom IC-T90A on 2 meters and 70 CM? | Antenna | |||
Ohio/Penn DX Bulletin #649 | Dx | |||
Ohio/Penn DX Bulletin #649 | Dx | |||
Mod Wanted: Icom 706 on 11 meters | Antenna | |||
Beware ICOM 746 owners! Do not use on 60 meters. | Equipment |