Hello and thanks for reading.
I bought a R-2001D on eBay and am just getting my feet wet on using all the
functions.
Everything seems to be working, but I am wondering about the RF Generate
function. It seems to be low on maximum output - and one line on the display
shows DIST/SINAD INPUT TOO LOW instead of giving the SINAD reading.
Is this a normal reading? If not, is it correctable by an adjustment or what
module needs ti be repaird or replaced?
Thanks for any info you can pass on to me.
Larry McGee

Hello and thanks for reading.
I bought a R-2001D on eBay and am just getting my feet wet on using
all the functions.
Everything seems to be working, but I am wondering about the RF
Generate function. It seems to be low on maximum output - and one line
on the display shows DIST/SINAD INPUT TOO LOW instead of giving the
SINAD reading. Is this a normal reading? If not, is it correctable by
an adjustment or what module needs ti be repaird or replaced?
Thanks for any info you can pass on to me.
Larry McGee

Larry, I am not familiar with the 2001D, but have used one many
years ago. I am somewhat confused by your problem description, above.
Unless I am misunderstanding you, you are complaining about low RF
output?... while at the same time complaining about a display line
saying, " DIST/SINAD INPUT TOO LOW " That's two problems. I can't
suggest anything about the first, but what are you hooking the
DIST/SINAD input up to when getting the "too low" reading? It should be
a receiver speaker while you are generating a 1000Hz modulated tone at
3KHz deviation. Sorry if not necessary, but you DO know how to use
the SINAD meter on that instrument, right?

Ed K7AAT