| Home |
| Search |
| Today's Posts |
|
#1
August 18th 04, 11:42 PM
|
|||
|
|||
FT-90 Loss of extended receive
Looking for advice on my FT-90:
I recently did a reset on th radio (not complete reset, just defaults) and I lost all the extended receive in the rig-you can only tune now between 144-148 and 430-450 MHz. Does anyone know how to bring back the extended rx? Doesn't seem to be in the menu, and its not a problem with the band scan limits. I reset it again, and the extended receive didn't come back. Any ideas? Ken, N2ZN |
|
#2
August 19th 04, 12:46 AM
|
|||
|
|||
|
"Ken Boasi" wrote in message
om... Looking for advice on my FT-90: I recently did a reset on th radio (not complete reset, just defaults) and I lost all the extended receive in the rig-you can only tune now between 144-148 and 430-450 MHz. Does anyone know how to bring back the extended rx? Doesn't seem to be in the menu, and its not a problem with the band scan limits. I reset it again, and the extended receive didn't come back. Any ideas? Ken, N2ZN According to: http://www.radiomods.co.nz/yaesu/yaesuft90.html you need to do a 'Master Reset', as described, when turning on again, assuming you've done the hardware mod in the first place. Ken |
|
#3
August 19th 04, 12:46 AM
|
|||
|
|||
|
"Ken Boasi" wrote in message
om... Looking for advice on my FT-90: I recently did a reset on th radio (not complete reset, just defaults) and I lost all the extended receive in the rig-you can only tune now between 144-148 and 430-450 MHz. Does anyone know how to bring back the extended rx? Doesn't seem to be in the menu, and its not a problem with the band scan limits. I reset it again, and the extended receive didn't come back. Any ideas? Ken, N2ZN According to: http://www.radiomods.co.nz/yaesu/yaesuft90.html you need to do a 'Master Reset', as described, when turning on again, assuming you've done the hardware mod in the first place. Ken |
|
#4
August 19th 04, 12:46 AM
|
|||
|
|||
|
"Ken Boasi" wrote in message
om... Looking for advice on my FT-90: I recently did a reset on th radio (not complete reset, just defaults) and I lost all the extended receive in the rig-you can only tune now between 144-148 and 430-450 MHz. Does anyone know how to bring back the extended rx? Doesn't seem to be in the menu, and its not a problem with the band scan limits. I reset it again, and the extended receive didn't come back. Any ideas? Ken, N2ZN According to: http://www.radiomods.co.nz/yaesu/yaesuft90.html you need to do a 'Master Reset', as described, when turning on again, assuming you've done the hardware mod in the first place. Ken |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| Comet B-10 VHF Antenna Question | Antenna | |||
| QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
| The two sorts of loss | Antenna | |||
Linear Mode
