| Home |
| Search |
| Today's Posts |
|
#1
January 18th 06, 04:43 PM
posted to rec.radio.amateur.equipment
|
|||
|
|||
Kenwood TS-450s optional filter question
My Kenwood TS-450sat has both 2.4 KHz filters installed and only the 500 Hz CW positions empty. I would like to install the YK-88SN-1 filter. Can I plug the YK-88SN-1 1.8 KHz filter in one of the open positions normally used for the 500 Hz CW filter? I'm hoping to be able to use the two 2.4 KHz filters for normal operation, and then switch to the 1.8 KHz filter in the 500 setting when someone is parked closer than 3 KHz away. Thanks in advanced.. -Michael |
|
#2
January 18th 06, 05:57 PM
posted to rec.radio.amateur.equipment
|
|||
|
|||
|
Kenwood TS-450s optional filter question
Roger Rabbit wrote: My Kenwood TS-450sat has both 2.4 KHz filters installed and only the 500 Hz CW positions empty. I would like to install the YK-88SN-1 filter. Can I plug the YK-88SN-1 1.8 KHz filter in one of the open positions normally used for the 500 Hz CW filter? I'm hoping to be able to use the two 2.4 KHz filters for normal operation, and then switch to the 1.8 KHz filter in the 500 setting when someone is parked closer than 3 KHz away. Thanks in advanced.. -Michael That is exactly the way my TS-450sat is configured - works great. I also have a YG-455CN-1 250 Hz filter in the 455 kHz slot and end up with the best of both worlds. Dave |
|
#3
January 19th 06, 05:37 PM
posted to rec.radio.amateur.equipment
|
|||
|
|||
|
Kenwood TS-450s optional filter question
On Wed, 18 Jan 2006 11:57:35 -0500, Dave Holford
wrote: Roger Rabbit wrote: My Kenwood TS-450sat has both 2.4 KHz filters installed and only the 500 Hz CW positions empty. I would like to install the YK-88SN-1 filter. Can I plug the YK-88SN-1 1.8 KHz filter in one of the open positions normally used for the 500 Hz CW filter? I'm hoping to be able to use the two 2.4 KHz filters for normal operation, and then switch to the 1.8 KHz filter in the 500 setting when someone is parked closer than 3 KHz away. Thanks in advanced.. -Michael That is exactly the way my TS-450sat is configured - works great. I also have a YG-455CN-1 250 Hz filter in the 455 kHz slot and end up with the best of both worlds. Dave I ordered the YK-88SN-1 from HRO yesterday after reading your reply. It looks like the YG-455CN-1 has been discontinued. Inrad has a similar filter available for the Kenwood 450, but it is $155.00. Perhaps I'll watch Ebay for awhile and see what comes up. Thanks for your help. -Michael |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: INRAD SSB Filter for Kenwood Radios | Swap | |||
| WTB YK-107C Kenwood FILTER | Swap | |||
| FS: Kenwood YK-88CN 270Hz CW filter | Swap | |||
| FS: Kenwood YK-88C CW Filter | Swap | |||
| FS: KENWOOD YG-455C-1 CW 500HZ CW FILTER | Swap | |||
Linear Mode
