| Home |
| Search |
| Today's Posts |
|
#6
March 27th 07, 05:04 AM
posted to rec.radio.amateur.homebrew,sci.electronics.basics,sci.electronics.design
|
|||
|
|||
VCXO frequency isn't high enough
"Anthony Fremont" wrote in message ... Jamie wrote: You need to reduce the inductor.. that is causing a down swing in your freq. Thanks, I took it out and the frequency increased by only about 70Hz, but it did increase. :-) Do you know of anything else I can do to increase the frequency by about another couple of kcs? Get the right freq crystal. Jimmie |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| High Frequency Propagation Models | Shortwave | |||
| Get High | Shortwave | |||
| Production of High frequency Crystals. | Homebrew | |||
| Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
| Wanted- Used Motorola UHF JT1000 High Split (470-520mhz), & a used Syntor X-9000 UHF High-Split | Swap | |||
Threaded Mode
